Buckshot

The powders I have are IMR4064, IMR4350 and Reloader 22. Thanks in advance.

Buckshot

ttt

Prarie_Boy1

A freind of mine had great success with a compressed load of realoader 19 in his .30-06

uncle_motorhead

Note these are for Winchester Brass which has the highest capacity. (and these are my max loads)
IMR 4350 58 gr mid to upper 2800 fps
IMR 4064 51 gr low 2800
RL 22 (works better on over capacity cases like Weatherby's)
RL 19 61 upper 2800 fps
Win 760 56 upper 2800 fps. (My favorite)

Barnes are GOOOOOOD bullets. Love them love them love them!

ranger140892

This is the data Barnes lists for 165 gr TSX for 30-06

ranger140892

I'll email you all the Barnes 30-06 TSX data if you want.

48thguns

My '06 load for years is 49.5gr IMR4064 for the 180's (2700'/sec). 51gr for the 165's (2895'/sec) and 52.5 gr for the 150's (2990'/sec). Don't know about the Barnes XXX speeds as I can't get them to group well in my rifles. The biggest problem I find in the '06 is with the slow burning powders that take up so much case space you end up compressing the load. I don't really mind compressing loads if there are no pressure signs, however, I would rather have the powder fill the case without compression or have a bit of room left over. Those Barnes bullets are really long so I would opt for something like the 4064 that doesn't eat case space. One good option would be to Ackley the thing and not worry about compression!Good luck and regards, Rick.

triggerhappy

My 4064 load is right between what is listed above getting a shade over 2700 fps with the 168 grain tsx. That load has served me well.