375 ultra mag.
#2
Nontypical Buck
Join Date: Jun 2003
Location:
Posts: 2,395
RE: 375 ultra mag.
I have found some375-r.u.m.data in Nosler's # 5 reloading manual.
I have been useing H-4831sc powder, Fed-215 primers & 260-grain Nosler Accubond bullets. My rifle has been very easy to load for.
Sorry I can not help you with any solid bullet reloading data. You might find what you are looking for atwww.hodgdon.com
Good Luck,
Wolf Killer
I have been useing H-4831sc powder, Fed-215 primers & 260-grain Nosler Accubond bullets. My rifle has been very easy to load for.
Sorry I can not help you with any solid bullet reloading data. You might find what you are looking for atwww.hodgdon.com
Good Luck,
Wolf Killer
#4
Typical Buck
Join Date: Jun 2005
Posts: 604
RE: 375 ultra mag.
Barnes has reloading data online under the products heading for the 375 UM up to 300 Grains including a solid and a Triple Shock with a .555 BC. Just click on products and scroll to the bottom of the screen and click on Reloading Manual, andpick page 633 at the bottom.
#5
Join Date: Jul 2005
Posts: 2
RE: 375 ultra mag.
I have had a 375 RUM for about a year now and have reloaded every bullet that I have ever fired out of it.
I have settled on 2 loads both with Nosler bullets.
1. 260gr Accubond with 103gr Reloder 22 powder for an average velocity of 3000fps.
This is 1 grain over book max but this load info was given to a friend of mine by a Tech at Hodgdon and I worked up to it very carefully. Excellent accurate load in my rifle. Don't use this data unless you reduce your powder charge by at least 10% and work up carefully. This load is safe in my rifle but may not be safe in yours.
2. My secondload is a 300gr Partition with 92grs of IMR 4350 for an average velocity of 2750fps.
Both will do anything that I'll ever need this rifle for. I'm going after grizzly/moose this fall and the Nosler Tech recommended that I use the 260gr Accubond load.
I have settled on 2 loads both with Nosler bullets.
1. 260gr Accubond with 103gr Reloder 22 powder for an average velocity of 3000fps.
This is 1 grain over book max but this load info was given to a friend of mine by a Tech at Hodgdon and I worked up to it very carefully. Excellent accurate load in my rifle. Don't use this data unless you reduce your powder charge by at least 10% and work up carefully. This load is safe in my rifle but may not be safe in yours.
2. My secondload is a 300gr Partition with 92grs of IMR 4350 for an average velocity of 2750fps.
Both will do anything that I'll ever need this rifle for. I'm going after grizzly/moose this fall and the Nosler Tech recommended that I use the 260gr Accubond load.