Guns Like firearms themselves, there's a wide variety of opinions on what's the best gun.

Problem Sighting In a New Rifle

Old 09-26-2004 | 06:10 PM
  #1  
Thread Starter
Fork Horn
 
Joined: Mar 2003
Posts: 141
Likes: 0
From: Grand Rapids, Michigan
Default Problem Sighting In a New Rifle

I just bought a Kimber in a 270wsm with a Ziess Scope (3.5-10X44), I cant seem to get good groups (4"+ at 200 yards). I would hit high and the next shot I would hit low, I am allowing the barrel to cool every other shot but still no luck. I know its not me because I am shooting 1 inch groups at the same time with my 7mm mag Browning and 1-3/4" with my Browning 243wssm and I am using a vise. The only thing I can think of is my scope rings, they are the Burris Signature rings with the plastic inserts, could it not have enough bite on the scope and it is moving with each shot? Any advise would help, I am going to Wyoming next month and I need to be confident that my shot will find it's target.
turkeyreaper is offline  
Reply
Old 09-26-2004 | 06:36 PM
  #2  
 
Joined: Aug 2004
Posts: 34
Likes: 0
Default RE: Problem Sighting In a New Rifle

Do you have a different scope that you could try so that you might eliminate one variable?
NUMBERFARMER is offline  
Reply
Old 09-26-2004 | 07:36 PM
  #3  
zrexpilot's Avatar
Nontypical Buck
 
Joined: Nov 2003
Posts: 2,695
Likes: 0
From: Texas
Default RE: Problem Sighting In a New Rifle

Try a different bullet. I had the same problem with my last new rifle, I was using winchester silver tip ballistics and it shot real bad, Put in federals and it tightened up big time, I shoot Hornady's now and have some pretty darned good grouping at 200 yds.
zrexpilot is offline  
Reply
Old 09-26-2004 | 08:59 PM
  #4  
Giant Nontypical
 
Joined: Feb 2003
Posts: 5,667
Likes: 0
From: fort mcmurray alberta canada
Default RE: Problem Sighting In a New Rifle

How many loads have you tried?It is unrealistic to expect a gun to shoot accurately with every load.
stubblejumper is offline  
Reply
Old 09-26-2004 | 09:24 PM
  #5  
Thread Starter
Fork Horn
 
Joined: Mar 2003
Posts: 141
Likes: 0
From: Grand Rapids, Michigan
Default RE: Problem Sighting In a New Rifle

All very good points, I will start with the ammo. I am currently shooting Winchester with a 140gr. molly coated accubond. If that doesnt work, off with the $600.00 Ziess and on with the $100.00 Tasco.

Thanks
Bill
turkeyreaper is offline  
Reply
Old 09-26-2004 | 09:28 PM
  #6  
zrexpilot's Avatar
Nontypical Buck
 
Joined: Nov 2003
Posts: 2,695
Likes: 0
From: Texas
Default RE: Problem Sighting In a New Rifle

I am currently shooting Winchester with a 140gr. molly coated accubond.
Bingo ! I bet thats the problem, the ballistic tips are also molly coated and those wouldnt shoot well in my gun. Bet ya a beer thats what the problem is.
zrexpilot is offline  
Reply
Old 09-26-2004 | 09:51 PM
  #7  
 
Joined: May 2004
Posts: 776
Likes: 0
From: SW Virginia
Default RE: Problem Sighting In a New Rifle

You're right, you have a problem. YOU WAITED TOO LONG TO GET A NEW RIFLE & SIGHT IT IN!
Well, can't get much better than a Kimber, and Ziess scopes are top notch. Chances are it's the ammo. Go get a box of another couple brands and bullet weights, and try
them out.
You didn't say what you were going hunting for - antelope, mule deer or elk?
Good luck - you're going to need it.

ps: Better yet, just take your Browning 7mm Mag.
Virginia7 is offline  
Reply
Old 09-27-2004 | 07:28 PM
  #8  
Thread Starter
Fork Horn
 
Joined: Mar 2003
Posts: 141
Likes: 0
From: Grand Rapids, Michigan
Default RE: Problem Sighting In a New Rifle

You were right Zrexpilot, I shot some Federal Premiums (non molly coated) and I shot out the 10 ring out with 4 shots at 100 yards. I never thought that it would make that big of a diffrence. I will say this, Kimber has great customer service, they were ready to send me a pre-paid box to next day air my gun to them and have it back to me before I went to Wyoming for my Mule Deer hunt, Outstanding customer Service!
turkeyreaper is offline  
Reply
Old 09-27-2004 | 08:43 PM
  #9  
zrexpilot's Avatar
Nontypical Buck
 
Joined: Nov 2003
Posts: 2,695
Likes: 0
From: Texas
Default RE: Problem Sighting In a New Rifle

glad to hear you got it worked out, you can keep trying different bullets and see the differences. I shoot a .243 and have found out that Hornady's ( 100 gr.) have the same ballistics as remington and winchesters 100 gr. but shoot flatter. My gun is sighted with the hornady's at 200 yds any other 100 gr bullet shoots about 2 1/2 inches low at 200 yds. the 100 gr. hornady's shoot as flat as 80 gr remingtons or winchesters but Hold a better pattern because they buck the wind better than the 80. gr. Try some hornady's I am a believer in them.
zrexpilot is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
StealthHtr22
Whitetail Deer Hunting
6
11-13-2008 11:16 AM
tgilson
Guns
12
11-15-2006 04:54 PM
jtr343
Guns
24
02-19-2005 04:28 AM
pinesap
Turkey Hunting
2
04-29-2004 07:01 PM
NC_archer
Technical
4
06-24-2003 07:08 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.