Bedding an HS Precision
06-14-2009 | 05:34 PM
#1
Thread Starter
Giant Nontypical
Joined: Mar 2006
Posts: 5,054
Likes: 0
From: ****ifornia
Bedding an HS Precision
Hey guys, I tore my 700p apart to paint the stock and I noticed the recoil lug area gap in the stock is WAY bigger then the lug on the barrel. So I'm thinking I should bed it to close the gap up. What do I need to do differently since it has the metal bedding system already in the stock? Just scuff it up and go over it?
Thx
Thx
06-15-2009 | 02:09 AM
#3
Nontypical Buck
Joined: Feb 2003
Posts: 2,284
Likes: 3
From: west central wi USA
RE: Bedding an HS Precision
Heed the advise. The recoil lug area, I suspect, is oversized to allow the stock to expand and contract with heat and moisture and not have the stock crack. Justthe rearsurface of the lug needs to contact the stock uniformly.
