HuntingNet.com Forums - Bedding an HS Precision

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Guns (https://www.huntingnet.com/forum/guns-10/)

- - Bedding an HS Precision (https://www.huntingnet.com/forum/guns/295990-bedding-hs-precision.html)

jeepkid

06-14-2009 05:34 PM

Bedding an HS Precision

Hey guys, I tore my 700p apart to paint the stock and I noticed the recoil lug area gap in the stock is WAY bigger then the lug on the barrel. So I'm thinking I should bed it to close the gap up. What do I need to do differently since it has the metal bedding system already in the stock? Just scuff it up and go over it?

Thx

bigbulls

06-14-2009 08:51 PM

RE: Bedding an HS Precision

LEAVE IT ALONE!!!!!!!!!

Wingbone

06-15-2009 02:09 AM

RE: Bedding an HS Precision

Heed the advise. The recoil lug area, I suspect, is oversized to allow the stock to expand and contract with heat and moisture and not have the stock crack. Justthe rearsurface of the lug needs to contact the stock uniformly.

jeepkid

06-15-2009 12:16 PM

RE: Bedding an HS Precision

There's a pretty big gap on both sides and the bottom...still shooting 1/2" though...

All times are GMT -8. The time now is 03:38 AM.