bore guide for bar
03-13-2003 | 02:58 AM
#1
Thread Starter
Joined: Feb 2003
Posts: 1,361
Likes: 0
From: dedham massachusetts USA
bore guide for bar
does anyone know of a good bore giude for a browning BAr chambered in 30-06sprg?
i see that midway has a ton of the bore guides there. most don' t go by calibers. they go by numbers. would like a hand if someone could help me.
i see that midway has a ton of the bore guides there. most don' t go by calibers. they go by numbers. would like a hand if someone could help me.
03-13-2003 | 04:00 PM
#2
Joined: Feb 2003
Posts: 429
Likes: 0
From: meridian idaho USA
RE: bore guide for bar
I thought you had to clean a BAR from the end of the barrel not through the bore.
If so you would have no use for a bore guide.
If you are cleaning you BAR from the bore end do you have to dissassemble it to some extent first?
Just curious, never owned one.
If so you would have no use for a bore guide.
If you are cleaning you BAR from the bore end do you have to dissassemble it to some extent first?
Just curious, never owned one.
03-13-2003 | 04:05 PM
#3
Nontypical Buck
Joined: Feb 2003
Posts: 4,781
Likes: 0
From: Body in SE WI, mind in U.P.
RE: bore guide for bar
Are you looking for a muzzle protector, their pretty easy to come by. I bought one from a guns shop that was basicly a brass cone that works for verything for me from 6.5mm to .50.
If you take an empty brass case of .264 caliber or smaller -a .25-06 case would probably work really well, and cut the neck portion off about 3/4" back from the mouth of the case and chamfer the brass edges, you should have a satisfactory bore guide.
If you take an empty brass case of .264 caliber or smaller -a .25-06 case would probably work really well, and cut the neck portion off about 3/4" back from the mouth of the case and chamfer the brass edges, you should have a satisfactory bore guide.
Thread
Thread Starter
Forum
Replies
Last Post
BeltedMag
Hunting Gear Discussion
4
09-16-2007 09:29 PM
