What height mounts/rings for 50mm...??
06-12-2008 | 10:19 PM
#1
Thread Starter
Giant Nontypical
Joined: Mar 2006
Posts: 5,054
Likes: 0
From: ****ifornia
What height mounts/rings for 50mm...??
Well I just ordered a Zeiss 6.5-20x50 to go on the .243AI. I will most likely need "high" rings for the scope to clear right? Or would "mediums" work? And should I go with a sloped base or flat?
06-12-2008 | 10:26 PM
#2
Nontypical Buck
Joined: Aug 2006
Posts: 3,192
Likes: 0
From: Rivesville, WV
RE: What height mounts/rings for 50mm...??
Too many variables involved to determine the height of rings needed. Especially on a custom, and the length of the base.
For your base and that scope it depends on the distance you want to shoot. You should be able to get 600 and close to 700 yards with a standard base. You wil need a 20MOA base if you want a greater distance. Tom.
For your base and that scope it depends on the distance you want to shoot. You should be able to get 600 and close to 700 yards with a standard base. You wil need a 20MOA base if you want a greater distance. Tom.
06-13-2008 | 07:30 AM
#3
Giant Nontypical
Joined: Feb 2003
Posts: 6,471
Likes: 0
From:
RE: What height mounts/rings for 50mm...??
Depends on the "ring" if you plan on using Talleys..call Talley and Gary can tell you exactly what ring height...With a Swaro or Kahles 50mm you can get away with lowTalley rings.
06-13-2008 | 03:31 PM
#4
Thread Starter
Giant Nontypical
Joined: Mar 2006
Posts: 5,054
Likes: 0
From: ****ifornia
RE: What height mounts/rings for 50mm...??
ORIGINAL: Ridge Runner
jeep, the need for a sloped base depends on how far you intend to shoot, the zeiss if its a conquest doesn't have much adjustment since its a 1" tube so I'd say yes to the sloped base. glen seekins builds awesome bases and rings.
as far as rings, all my 50mm loopys set in medium tactical rings.
RR
jeep, the need for a sloped base depends on how far you intend to shoot, the zeiss if its a conquest doesn't have much adjustment since its a 1" tube so I'd say yes to the sloped base. glen seekins builds awesome bases and rings.
as far as rings, all my 50mm loopys set in medium tactical rings.
RR
And, yes, its a Conquest, so your right not a whole lot of adjustment.
I'll check out the Seekins.
06-13-2008 | 08:40 PM
#6
Thread Starter
Giant Nontypical
Joined: Mar 2006
Posts: 5,054
Likes: 0
From: ****ifornia
RE: What height mounts/rings for 50mm...??
ORIGINAL: Ridge Runner
www.seekinsprecision.com
glen runs a 1 man shop, his bases and rings are second to none and just over 1/2 the price of loopy or badger.
RR
www.seekinsprecision.com
glen runs a 1 man shop, his bases and rings are second to none and just over 1/2 the price of loopy or badger.
RR
Are they that much better then Warne and Talleys?
