thats all .308 what is the best for 06....i looked and they did not carry 06 springfield....in SIERRA brands

im a nebe for online gun stuff....is /CS boxes per case??

Take it you are not a reloader??? These are bullets only, the .308 is the diameter of bullet the 3006 uses.

Federal loads the 168gr seirra matchking for the 06'.

o0o0 that would explain why thier so cheap....GOT YA ...mark me down for one F-UP

but the site caried full load.....i went to the site to double check there are full load spr. for $20 for 200 rounds???? am i 0-2 or am i right anyone wanna double check that

look am i crazy ??? http://www.grafs.com/fc/browse.php?q=&v=410&s=az&p=222

http://www.grafs.com/fc/browse.php?q=&v=320&s=az&p=222

First item- 168 seirra matchking loaded by federal $27.99

Not crazy just weren't looking in the right spot

not u got me CRAZY!!!!! im looking for the whole round casing and all.....(btw we ae on the same link i just limeted to one brand)

It depends a lot on what your gun likes. The standard twist for the 30-06 is 1 in 10", but he Browning B78 and Husquvarna barrels are 1 in 12" twist. I have a B78 30-06 that can put 3 shots in 3" at 300yds using factory winchester 150gr ballisticsivertips. It's just a hunting rifle so I haven't tried it any further than that. I wouldn't say that's very good for long range "sniping", but plenty good for hunting. My wife has a custom 30-06 on a mauser 98 action that will put my handloads using 150gr B-Tips and 50.5gr of Ramshot TAC into one ragged hole at 100yds. Haven't tried it at longer range yet. Not sure what the twist is on this one either.

I used your link to see if they had federal, which they did and thenI pasted it for you in my reply. These are loaded 3006 cartridges with the 168gr Seirra Matchking bullet (top of the page when the link opens up - no image available). If your still confused here is a link to federal cartridge:http://www.federalcartridge.com/ballistics/Ammo_Search.aspx?act=choose&firearm=1&s1=1