Looking for a recommendation for a broadhead target
09-30-2007, 08:37 AM
#1
Spike
Thread Starter
Join Date: Sep 2007
Posts: 44
Looking for a recommendation for a broadhead target
My broadheads out of my Horton 175 sink past the vanes into my older Block target. It is hard on vanes and makes extraction difficult.
What recommendations do you have for a good taget for broadhead shooting?
What recommendations do you have for a good taget for broadhead shooting?
09-30-2007, 09:08 AM
#2
Fork Horn
Join Date: Jul 2007
Location:
Posts: 413
RE: Looking for a recommendation for a broadhead target
on cabelas the site I saw morells crossbow broadhead target. http://www.cabelas.com/cabelas/en/te...amp;id=0039147
09-30-2007, 09:33 AM
#3
Nontypical Buck
Join Date: Feb 2006
Location: arkansas
Posts: 3,147
RE: Looking for a recommendation for a broadhead target
I've got two McKenzy layered foam, orange, w/ cables on each corner you can tighten twice each. I immediately tightened them all to the max for the Max, lol. they are holding up alot better than my Block did, but I'm always looking for something better. Had a Rinehart 18-1, the epitome of xbow targets, imho, but it wasn't compatible w/ my GT's.
09-30-2007, 09:48 AM
#4
Fork Horn
Join Date: Jul 2007
Location:
Posts: 413
RE: Looking for a recommendation for a broadhead target
my block costs 80 bucks and its almost destroyed mostly from field points. I put a dot in between the regular dots to shoot the broadheads. Should get me through the season though. I'll try something else next year.
09-30-2007, 12:16 PM
#5
Nontypical Buck
Join Date: May 2006
Location: MA
Posts: 1,653
RE: Looking for a recommendation for a broadhead target
My 18-1 target is taking alot of shots with broadheads and seems to be holding up great. It really does provide 18 decent target faces. I like it better than my block or cube but only time will tell.Ended up using a Sharpie to make new spots on the block cause you can chew them up pretty quick..
