$30 from Wall Mart
#4
Typical Buck
Join Date: Feb 2003
Location: Ontario Canada
Posts: 604
RE: $30 from Wall Mart
ORIGINAL: Hotburn76
Looks good David! Just curious if taking the bow off the stock changes your POI any? Have you ever noticed any changes after putting it back on and shooting again?
Looks good David! Just curious if taking the bow off the stock changes your POI any? Have you ever noticed any changes after putting it back on and shooting again?
#5
Nontypical Buck
Join Date: Feb 2006
Location: arkansas
Posts: 3,147
RE: $30 from Wall Mart
Jason,I take mine apart and re-assemble all the time w/ no change. Ya kinda gotta take one down to see this, but the part of the riser that mates to the rail has a small lip on either side that fits very close, over-lapping the rail, so even w/o the screws in place, it tends not to want to swivel or turn. This also comes into play if those two screws aren't loc-tited and loosen up a tad, you still hold your zero. By a tad I mean when you put your allen wrench in one and it is so loose you go "Dang, glad I caught this now" lol. Best results, keep em tight!
I had to send my limbs and riser into Dan Miller [Phoenix], one foul too many, lol, took six days total, he replaced both limbs and the dissipator
bars, no charge. While I was waiting, I unbolted the riser/limbs off of my Emax and put it on the Phoenix, I was just under an inch low at 20 yds.
I had to send my limbs and riser into Dan Miller [Phoenix], one foul too many, lol, took six days total, he replaced both limbs and the dissipator
bars, no charge. While I was waiting, I unbolted the riser/limbs off of my Emax and put it on the Phoenix, I was just under an inch low at 20 yds.
#7
Nontypical Buck
Join Date: Nov 2005
Location: Mn.
Posts: 3,399
RE: $30 from Wall Mart
Looks like it was meant to be.......? yes ?....So you do not need to unstring the recurve when you take it down like that.?........Just take the bolts out and leave it strung.........?.
If thats the case,the Vortex is looking better every week......
If thats the case,the Vortex is looking better every week......
#8
Typical Buck
Join Date: Feb 2003
Location: Ontario Canada
Posts: 604
RE: $30 from Wall Mart
The only time you need to unstring an Excalibur, is when you plan to store it in a HOT ENVIROMENT or for an extended period of time. If you have the DP pads and unstring the bow, remember to remove the pads first (simple and quick to do).
#10
RE: $30 from Wall Mart
"i dont care if you go after me for whatever your reasons are,but dont cause me to have some nut trying to locate me like before..thanks,sproul.. "
I can't imagine why!