thenuge15

I was messing around with the boone and crockett scoring sheet and was a little confused. They last thing they ask is the circumfrences or " H" measurments. If it is and 8 point do you measure the circumfrence of the beam tip right after the G3 or do you leave that blank. I want to know because I can get and extra two points if I do Thanks for the help

NorthernMN

H-1-2-3-4. Circumferences.
Circumferences are taken at the smallest place between corresponding normal points, as illustrated. If first point is missing, take H-1 and H-2 at smallest place between burr and second point. If G-4 is missing, take H-4 halfway between the center of G-3 and tip of main beam. Circumference measurements must be taken with a steel tape (a cable cannot be used for these measurements).

thenuge15

So how would you scor a 4 pt. My deer is not a 4 I was just curious. So you need all 4 H measurments even if you don' t have G4s.

thenuge15

bump.

tabby

I didn' t know that. I guess my deer will score over 100 after all.

" Circumferences are taken at the narrowest place as detailed in Figure C for each measurement. If the brow point is missing, take H-1 and H-2 at the smallest place between the burr and the G-2 point. If the G-4 point is missing, take H-4 halfway between the G-3 point and the tip of the main beam."
I got this off of the boone-crocket website.