HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Bowhunting (https://www.huntingnet.com/forum/bowhunting-18/)
-   -   any ideas (https://www.huntingnet.com/forum/bowhunting/264550-any-ideas.html)

YooperMike 09-23-2008 01:31 PM

RE: any ideas
 
Mount a boat winch in the back of the truck. Or even rig up the winch on a board and put some brackets in the bed of the truck. Boat winches are super cheap, like $30 bucks, and will give you more than enough power to load a deer.

nctaxi 09-23-2008 01:32 PM

RE: any ideas
 
Why not just modify the jet ski trailer to act as a small trailer to haul stuff including deer??????? Seems easier to me to weld a bed and rails together, then to take it apart to build something different. I don't think the seat bracket will hold, you need something heavier duty.

ltpelham 09-23-2008 01:35 PM

RE: any ideas
 
WHAT YOU LOST THAT DEAL FORD FOR A CHEV. eh AND IF IT WAS DIESEL MAN WOW.

proud owner of ford

7.3 Stage 3 injectors and 165hrs chip pushing 500hrs
last truck pull 280ft for a 3rd place finish!!!!!!!!

kyner 09-23-2008 01:40 PM

RE: any ideas
 
I bought a "hitch hauler" it is abracketthat slides into your receiver. I carry it in the back of my truck all season then slide it in when I need it. It is plenty big to put a deer on. I hunt alone all of the time.I am able to put any deer on it by myself and take it to where I'll hang it.

shrewbeer 09-23-2008 01:40 PM

RE: any ideas
 
I seem to remember saying you were trying to lose some weight. Get to a gym and do clean and jerks, and rowing. That will help you with dragging and lifting a deer. Kill two birds with one stone!

bigtim6656 09-23-2008 02:52 PM

RE: any ideas
 
there were issues with the trailer the trailer were shot my dad back up forgetting it was back there and bent the main bar that mounts to the hitch. It was heading to the junk yard any way

ORIGINAL: nctaxi

Why not just modify the jet ski trailer to act as a small trailer to haul stuff including deer??????? Seems easier to me to weld a bed and rails together, then to take it apart to build something different. I don't think the seat bracket will hold, you need something heavier duty.

bigtim6656 09-23-2008 02:54 PM

RE: any ideas
 
the ford was a 1990 f150 straight 6. There were some issues with it the cruise would not work and the speedo would bounce around. And the 4x4 had trouble disengaging. all due to a dumb mechanic. they are both gas.
The chevy's body is almost mint. there are a few issues with it but all cheap fixes.

ORIGINAL: ltpelham

WHAT YOU LOST THAT DEAL FORD FOR A CHEV. eh AND IF IT WAS DIESEL MAN WOW.

proud owner of ford

7.3 Stage 3 injectors and 165hrs chip pushing 500hrs
last truck pull 280ft for a 3rd place finish!!!!!!!!

WesternMdHardwoods 09-23-2008 03:04 PM

RE: any ideas
 
Tim dont worry about it once you kill your deer you will have no problem getting that deer in the bed! Throw it in there!! If you have to stand in the bed and PULL it in with your drag rope, it's not as hard as your making it out to be!! Hunt now worry later!!

Good Luck

jimmy28303 09-23-2008 03:21 PM

RE: any ideas
 
I have a ford with 6" of lift and have no prob putting deer in the back.

bigtim6656 09-23-2008 03:58 PM

RE: any ideas
 
i guest i could be just worrying about nothing. thats what i do worry.
I got my super mag game cart figure i will buy two 2x6s and see how that works

ORIGINAL: jimmy28303

I have a ford with 6" of lift and have no prob putting deer in the back.


All times are GMT -8. The time now is 12:28 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.