Field Point vs. Broadhead flight/grouping problem
#11
RE: Field Point vs. Broadhead flight/grouping problem
ORIGINAL: virginiashadow
Yes Bruce that was me---I mean I don't like to get caught up debating over "ethical" arrow weight and all ad naseum--it just gets old. What never gets old is talking about how to get my groups tighter. I believe I am shooting around #65 and shooting 400 Bemans. Thanks for any help all.
Kodiak--once every 4-5 shots probably--cant figure it out....I do grip my bow a little tighter than most.
Yes Bruce that was me---I mean I don't like to get caught up debating over "ethical" arrow weight and all ad naseum--it just gets old. What never gets old is talking about how to get my groups tighter. I believe I am shooting around #65 and shooting 400 Bemans. Thanks for any help all.
Kodiak--once every 4-5 shots probably--cant figure it out....I do grip my bow a little tighter than most.
#12
RE: Field Point vs. Broadhead flight/grouping problem
I had the very same problem. My Muzzy's weren't flying like my field points. With the season being this close, I decided to pick up some 2 blade Rage's. They flew just like my field points. I'll go with the Rage's this year, and really work on my bow next year to make sure everything is tuned up well. I just don't want to mess around with my setup this close to the beginning of the season. My guess is that you are having the same problem I was.
#13
Nontypical Buck
Join Date: Sep 2004
Location: Manassas, VA
Posts: 3,612
RE: Field Point vs. Broadhead flight/grouping problem
Bruce:
"If it is once every 4-5 shots it could be grip, as stated, or it could be that one arrow. Mark your arrows with some numbers, dots, lines, or something to distinguish each one and then you will know if it is the same arrow evrytime or a different arrow. It it is a different arrow each time then it could be grip. I still think your arrows may be a little weak spined for even 65#. What bow do you shoot? "
What spine would you recommend for me? I shoot a Reflex Excursion 2004. I just played around and put on some heavier broadheads today and shot....and they seemed to group tighter and not have the side to side inconsistency. Maybe it was just a placebo effect, not sure. Refletched a bunch of my arrows tonight and gonna get back at it tomorrow.
"If it is once every 4-5 shots it could be grip, as stated, or it could be that one arrow. Mark your arrows with some numbers, dots, lines, or something to distinguish each one and then you will know if it is the same arrow evrytime or a different arrow. It it is a different arrow each time then it could be grip. I still think your arrows may be a little weak spined for even 65#. What bow do you shoot? "
What spine would you recommend for me? I shoot a Reflex Excursion 2004. I just played around and put on some heavier broadheads today and shot....and they seemed to group tighter and not have the side to side inconsistency. Maybe it was just a placebo effect, not sure. Refletched a bunch of my arrows tonight and gonna get back at it tomorrow.
#14
Typical Buck
Thread Starter
Join Date: Dec 2005
Location: Southern Maryland (St. Mary\'s)
Posts: 884
RE: Field Point vs. Broadhead flight/grouping problem
Thanks. Until I saw your second post, I was not sure if you were answering to my problem or the HIJACK.
ORIGINAL: KodiakArcher
Could be a few things changed in your rig from last year such as cam timing and poundage due to cable/string wear. If they are a new type broadhead they could effect the balance of the shaft differently. For the situation you describe, tuning my RH bow, I would very slightly (.050" or so at a time) move the rest to the right (in toward the bow) until they start grouping together.Very small changes will move the broadhead groups more than they move the fieldpoint groups and at some point they should impact very close to the same point. In addition, your groups should tighten up as you get things more finetuned.
Could be a few things changed in your rig from last year such as cam timing and poundage due to cable/string wear. If they are a new type broadhead they could effect the balance of the shaft differently. For the situation you describe, tuning my RH bow, I would very slightly (.050" or so at a time) move the rest to the right (in toward the bow) until they start grouping together.Very small changes will move the broadhead groups more than they move the fieldpoint groups and at some point they should impact very close to the same point. In addition, your groups should tighten up as you get things more finetuned.
#15
RE: Field Point vs. Broadhead flight/grouping problem
I have a similar issue with my Muzzy Mx4s on my carbons, I talked to my proshop and Mike said its a plaining issue. You need to sight your bow in for the broadheads or use a mechanical style head. Mine arent drifint left or right but dropping 3-4 inches. I can bring my sight down and whala. You may have to move your rest or sight, which ever you prefer to get the accuracy needed to improve on the plaining. This is common with some arrow and broadhead combinations. if youre looking to go wiht a mechanical Mike recomended the Rage SlipCam. I may try them out even though im not a fan of mechanical heads.
#16
Nontypical Buck
Join Date: Sep 2004
Location: Manassas, VA
Posts: 3,612
RE: Field Point vs. Broadhead flight/grouping problem
Navy--sorry for the HIJACK. I didn't mean to do it all. I was just caught up with what I was doing yesterday and it was important. Sometimes on my threads, people start similar discussions to what I am asking and it seems to help me gain a better understanding. That being said, sorry about the hijack.
#17
Join Date: May 2005
Location: StL, MO
Posts: 745
RE: Field Point vs. Broadhead flight/grouping problem
ORIGINAL: wis_bow_huntr
I have a similar issue with my Muzzy Mx4s on my carbons, I talked to my proshop and Mike said its a plaining issue. You need to sight your bow in for the broadheads or use a mechanical style head.
I have a similar issue with my Muzzy Mx4s on my carbons, I talked to my proshop and Mike said its a plaining issue. You need to sight your bow in for the broadheads or use a mechanical style head.
In fact, there is a thread floating around here about why be anti-mechanical, and that right there is why I am anti-mechanical, because too many hunters throw on a mechanical instead of tuning their bow for good arrow flight.
#18
Join Date: May 2005
Location: StL, MO
Posts: 745
RE: Field Point vs. Broadhead flight/grouping problem
ORIGINAL: KodiakArcher
Could be a few things changed in your rig from last year such as cam timing and poundage due to cable/string wear. If they are a new type broadhead they could effect the balance of the shaft differently. For the situation you describe, tuning my RH bow, I would very slightly (.050" or so at a time) move the rest to the right (in toward the bow) until they start grouping together.Very small changes will move the broadhead groups more than they move the fieldpoint groups and at some point they should impact very close to the same point. In addition, your groups should tighten up as you get things more finetuned.
Could be a few things changed in your rig from last year such as cam timing and poundage due to cable/string wear. If they are a new type broadhead they could effect the balance of the shaft differently. For the situation you describe, tuning my RH bow, I would very slightly (.050" or so at a time) move the rest to the right (in toward the bow) until they start grouping together.Very small changes will move the broadhead groups more than they move the fieldpoint groups and at some point they should impact very close to the same point. In addition, your groups should tighten up as you get things more finetuned.
#19
RE: Field Point vs. Broadhead flight/grouping problem
ORIGINAL: virginiashadow
Bruce:
"If it is once every 4-5 shots it could be grip, as stated, or it could be that one arrow. Mark your arrows with some numbers, dots, lines, or something to distinguish each one and then you will know if it is the same arrow evrytime or a different arrow. It it is a different arrow each time then it could be grip. I still think your arrows may be a little weak spined for even 65#. What bow do you shoot? "
What spine would you recommend for me? I shoot a Reflex Excursion 2004. I just played around and put on some heavier broadheads today and shot....and they seemed to group tighter and not have the side to side inconsistency. Maybe it was just a placebo effect, not sure. Refletched a bunch of my arrows tonight and gonna get back at it tomorrow.
Bruce:
"If it is once every 4-5 shots it could be grip, as stated, or it could be that one arrow. Mark your arrows with some numbers, dots, lines, or something to distinguish each one and then you will know if it is the same arrow evrytime or a different arrow. It it is a different arrow each time then it could be grip. I still think your arrows may be a little weak spined for even 65#. What bow do you shoot? "
What spine would you recommend for me? I shoot a Reflex Excursion 2004. I just played around and put on some heavier broadheads today and shot....and they seemed to group tighter and not have the side to side inconsistency. Maybe it was just a placebo effect, not sure. Refletched a bunch of my arrows tonight and gonna get back at it tomorrow.
#20
RE: Field Point vs. Broadhead flight/grouping problem
ORIGINAL: RobinAim Low
Absoluely not!Nothing personal wis-b-h, but if a broadhead tipped arrow is planing, then you have a tuning issue that needs to be corrected correctly. Moving a sight is not the answer, and just throwing on a mechanical is not either.I just cannot express enough the importance of a straight flying arrow when it comes to hunting. You are cheating yourself and the animal you hunt ifyou hunt with anything less.
In fact, there is a thread floating around here about why be anti-mechanical, and that right there is why I am anti-mechanical, because too many hunters throw on a mechanical instead of tuning their bow for good arrow flight.
ORIGINAL: wis_bow_huntr
I have a similar issue with my Muzzy Mx4s on my carbons, I talked to my proshop and Mike said its a plaining issue. You need to sight your bow in for the broadheads or use a mechanical style head.
I have a similar issue with my Muzzy Mx4s on my carbons, I talked to my proshop and Mike said its a plaining issue. You need to sight your bow in for the broadheads or use a mechanical style head.
In fact, there is a thread floating around here about why be anti-mechanical, and that right there is why I am anti-mechanical, because too many hunters throw on a mechanical instead of tuning their bow for good arrow flight.
ORIGINAL: ScottF2345
I had the very same problem. My Muzzy's weren't flying like my field points. With the season being this close, I decided to pick up some 2 blade Rage's. They flew just like my field points. I'll go with the Rage's this year, and really work on my bow next year to make sure everything is tuned up well. I just don't want to mess around with my setup this close to the beginning of the season. My guess is that you are having the same problem I was.
I had the very same problem. My Muzzy's weren't flying like my field points. With the season being this close, I decided to pick up some 2 blade Rage's. They flew just like my field points. I'll go with the Rage's this year, and really work on my bow next year to make sure everything is tuned up well. I just don't want to mess around with my setup this close to the beginning of the season. My guess is that you are having the same problem I was.