Rage 3 blade

Reply Subscribe

Thread Tools

06-10-2008 | 08:40 PM

#21

RuLzU

Fork Horn

Joined: Jan 2008

Posts: 490

Likes: 0

From: Tampa

RE: Rage 3 blade

hey guys.. about the rage 2 and 3.. do they use the same size O rings?
as for the Rage 2, could i buy those O rings at say.. home depot? or must i buy through rage products.. thanks.

06-10-2008 | 08:51 PM

#22

DeerStalker80

Thread Starter

Joined: Sep 2007

Posts: 247

Likes: 0

From: TEXAS

RE: Rage 3 blade

first off yes any automotive store should have the correct o-rings just take one of the spares that comes with them and just match it to the ones at the store. Next if you want to test the rage in a target I have found that you have to push it through the target unscrew it then pull the arrow out. I tested it and tested mine to check to make sure the BH opened all of the time but yet I still hear of people saying there haveing issues with them.

06-10-2008 | 10:14 PM

#23

whitetailbowhunter

Nontypical Buck

Joined: Nov 2007

Posts: 3,071

Likes: 0

From:

RE: Rage 3 blade

Quote:

ORIGINAL: DeerStalker80

first off yes any automotive store should have the correct o-rings just take one of the spares that comes with them and just match it to the ones at the store. Next if you want to test the rage in a target I have found that you have to push it through the target unscrew it then pull the arrow out. I tested it and tested mine to check to make sure the BH opened all of the time but yet I still hear of people saying there haveing issues with them.

Next time i will just push them out the other side. Why didn't I think of that earlier!! would have saved me some blades!![>:][&:]