HuntingNet.com Forums - G5 Meta peep problem......

Page 1 of 5

Last »

Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Bowhunting (https://www.huntingnet.com/forum/bowhunting-18/)

- - G5 Meta peep problem...... (https://www.huntingnet.com/forum/bowhunting/226801-g5-meta-peep-problem.html)

buckeye

01-11-2008 08:37 PM

G5 Meta peep problem......

Have youguys noticed if your G5 meta peeps are "oblonging" out? My 1/4 inch hunter isn't round anymore..... More of an elliptical shape..... [/align]

Rob/PA Bowyer

01-11-2008 08:40 PM

RE: G5 Meta peep problem......

I only have two right now Scott. I put them on my General and Marquis. It's the first ones I've owned and I don't notice anything yet but they are fairly new. I have however heard of this before.

jmbuckhunter

01-11-2008 08:43 PM

RE: G5 Meta peep problem......

When they took mine off to put on my Verifier, the guy told me it wasn't round any more. I took a look and sure nuff I could tell it was oblong too. He sais the guy that tied it in had too much pressure on it. He should have had the ties farther from the peep.

I have heard others complain about this also.

buckeye

01-11-2008 08:49 PM

RE: G5 Meta peep problem......

Huh.... I have never heard anyone mention this before.... [&:]

Not cool..... I own about $60 worth of these things........

jmbuckhunter

01-11-2008 08:54 PM

RE: G5 Meta peep problem......

It has been mentioned on here before. But I had also heard they had fixed the problem. I guess not!!

gzg38b

01-11-2008 09:05 PM

RE: G5 Meta peep problem......

Quote:

ORIGINAL: jmbuckhunter

It has been mentioned on here before. But I had also heard they had fixed the problem. I guess not!!

G5 made the peeps stronger last year in response to these complaints. You may have got an old one. I've read in numerous places that the cause of the problem was operator error - people tying them in too close to the peep putting too much pressure on the peep.

I've never had this problem with mine. I tie it about 3/4" above and below.

buckeye

01-11-2008 09:08 PM

RE: G5 Meta peep problem......

Quote:

ORIGINAL: gzg38b

Quote:

ORIGINAL: jmbuckhunter

It has been mentioned on here before. But I had also heard they had fixed the problem. I guess not!!

I don't even tie my peep in in that fashion... So that is not why mine has done it.....There is next to no pressure on my peep from serving it in..... [&:]

Back 40 Tree Rat

01-11-2008 09:11 PM

RE: G5 Meta peep problem......

How could this happen? They are made out of magnesium(spelling?) & that stuff breaks not bends.

ArrowMike

01-12-2008 12:15 AM

RE: G5 Meta peep problem......

Quote:

ORIGINAL: buckeye

Quote:

ORIGINAL: gzg38b

Quote:

ORIGINAL: jmbuckhunter

It has been mentioned on here before. But I had also heard they had fixed the problem. I guess not!!

I don't even tie my peep in in that fashion... So that is not why mine has done it.....There is next to no pressure on my peep from serving it in..... [&:]

Yes, they did have a problem with them about a year ago. I know that they changed them to fix it. Call them and see if they will replace them for you.

Cougar Mag

01-12-2008 01:35 AM

RE: G5 Meta peep problem......

Do they even still make them? Just went to their site and don't see them listed anywhere.

All times are GMT -8. The time now is 06:49 PM.

Page 1 of 5

Last »

Show 40 post(s) from this thread on one page