Bow Case Setup?
01-09-2008 | 07:48 AM
#1
Thread Starter
Member
Joined: Oct 2007
Posts: 79
Likes: 0
From: SW Michigan
Bow Case Setup?
I’m new to Bow Hunting and I got a nice hard shelled bow case for Christmas. http://www.exploreproducts.com/guardforce-bowcase-gds-7467c-archerycase.htm
I’m not satisfied with the arrangement of my case yet. My biggest problem is not knowing what to do with my broad heads. I also don’t like the way my trigger release seems to be just “sitting” on the foam, I feel it needs a home.
Does anyone have any Bow Case organization tips for me…. Please?
I’m not satisfied with the arrangement of my case yet. My biggest problem is not knowing what to do with my broad heads. I also don’t like the way my trigger release seems to be just “sitting” on the foam, I feel it needs a home.
Does anyone have any Bow Case organization tips for me…. Please?
01-09-2008 | 08:00 AM
#2
Giant Nontypical
Joined: Feb 2003
Posts: 6,453
Likes: 0
From: North Lima Ohio & Clarion Pa
RE: Bow Case Setup?
Well I got a small case with a latch lid (like for fishing lures) maybe 10"x6"x1.5" deep. And right in the center of the foam on the bottom, I cut the foam to allow this case to be inset. I can store tips, broadheads, and all the other assorted "small parts" in the partitioned sections.
It's under the open area of the bow (between riser and string)so no padding is compromised. The release just lays in the corner on the foam!
It's under the open area of the bow (between riser and string)so no padding is compromised. The release just lays in the corner on the foam!
