Vetrix's clearance problem
#1
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: raleigh nc USA
Posts: 311
Vetrix's clearance problem
I just noticed that I must have a clearance problem on my Hoyt Vetrix's.
I started shooting feather today and I am messing the feathers up on my pull back. I use a QAD Ultra drop away rest. I have been using the cock feather up and never noticed with 4" vanes. Has anyoneelse that shoots a Vetrixs had this plobem?
Mark
I started shooting feather today and I am messing the feathers up on my pull back. I use a QAD Ultra drop away rest. I have been using the cock feather up and never noticed with 4" vanes. Has anyoneelse that shoots a Vetrixs had this plobem?
Mark
#4
RE: Vetrix's clearance problem
I just checked every different arrow I own and none come close to the cable on my Vectrix. I even rotated the cock vane toward the cable to try to hit it. I would check the rest and make sure that its not to far in(toward the riser). Also check to make sure that you are not dragging the feathers backward through the rest?