My vanes are doing the same thing thru my bisquit. I am thinking of going to a drop away.

I've been fletching with vanetec and shooting out of WB for several months. They hold up good. Be sure the WB is squared up with the string. Looks like by your pic the unglued fletch, you could be out of square or could be just a bad glue job.

the more im reading what u guys say the more im thinkin the factory ones are just garbage....they are very soft and cheap lookin...im gonna get the blazers and hopefully problem solved....im assuming ill need to take it to the local proshop 2 get em glued right?

u got it right deer get your local shop to do it and if they come off get them to do it again and blame them lol

Been doing my own arrows for years. I have even bought some off eBay and re-fletched them before using. Cheaper then buying on line somewhere else. I think if you do your own, glue them right, put a dab of glue on tip of fletch to prevent peel backs, I think you will find the last much longer. The only problem I have with feathers is though they are forgiving the WB I use shredds them good by time season is over. Then again I have my own turkey feathers cut down and use them so it is reallly cheap to do........ and good to recycle! [8D]

Proper setup + tuning + Blazer vanes = happy camper!