What glue for fletching vanes?
#1
Fork Horn
Thread Starter
Join Date: Dec 2004
Location: Mt. Iron, Mn
Posts: 387
What glue for fletching vanes?
I'm having problems with my vanes coming off while shooting. I'm currently using fletch tite ( I think that's what it's called). I'm using Dura Vanes and their not lasting very long. Any other tips on what kind of glue I should use? Thanks for all the input.
#2
RE: What glue for fletching vanes?
If you're shooting carbons, Fletch Tite Platinum is good, not the stuff in the white tube. Regular crazy glue gel works good, loctite super glue is good, and almost anything works if you use wraps.
#4
RE: What glue for fletching vanes?
I use goat tuff with blazers and duravanes.
When fletching a bare shaft (ie not capped or crested) I also lightly sand with 220 grit and then wipe clean with plain water and allow them plenty of time to dry.
No problems at all!
When fletching a bare shaft (ie not capped or crested) I also lightly sand with 220 grit and then wipe clean with plain water and allow them plenty of time to dry.
No problems at all!
#5
Nontypical Buck
Join Date: Feb 2003
Location: Brampton Ontario Canada
Posts: 1,038
RE: What glue for fletching vanes?
I switched to 'PINE RIDGE INSTANT ARROW GLUE' 3 years ago and have have excellent results.
I didlose an occasional vane or so--but that's probably because ofbad preparation.
I didlose an occasional vane or so--but that's probably because ofbad preparation.