which is the best hoyt bow?
#1
Thread Starter
Join Date: Jan 2004
Location:
Posts: 163
which is the best hoyt bow?
What do you guys think is the best hoyt bow the VIPER TEC,V TEC or X TEC. The bow would be for shooting target and hunting. Is one alot better than others. Can't figure out the differance they all have the same cam. These are the bows i want for hunting this year I hope if i can get a job with my friends dad in texas doing some construction. thank for the info .
#2
RE: which is the best hoyt bow?
It all depends on what your are looking for. I for one have a longer draw length and am taller than average. I went with the Protec because of the longer draw length and the longer ATA. It is more forgiving for me. If I had a shorter draw length I would be more apt to go with a shorter brace heigth and shorter ATA. Alot of it depends on you and what you are looking for. They are all great bows just set up a little different for diferent people and different applications.
#4
Nontypical Buck
Join Date: Aug 2004
Location: Bradford, Ontario
Posts: 2,205
RE: which is the best hoyt bow?
DO YOU REALLY WANT TO SPEND THE MONEY ON A HOYT WHEN YOU CAN BUY A REFLEX FOR ALOT LESS.
#7
Join Date: Feb 2003
Location: Southeast PA
Posts: 242
RE: which is the best hoyt bow?
For TARGET and hunting, none of the above. Once you throw target into the mix, you really want to be looking at the Ultratec and Protec. But to choose one from the list, definitely the Vtec.
#9
Thread Starter
Join Date: Jan 2004
Location:
Posts: 163
RE: which is the best hoyt bow?
I wasn't talking about real target shooting. I shoot a bow that is 32 ata for target because it is a hunting bow. I'm not to tall about 5.4 if that makes a difference.
Smitty how smooth is the vipertec dose it fell like 60 if that is what it is set at cause i heard that the cam and a half dosn't fell like what you are pulling.
Smitty how smooth is the vipertec dose it fell like 60 if that is what it is set at cause i heard that the cam and a half dosn't fell like what you are pulling.