Muzzy zero effect for marquis?
10-31-2007 | 08:35 AM
#2
Joined: Oct 2007
Posts: 6
Likes: 0
RE: Muzzy zero effect for marquis?
This one might, work. I use to have a Zero effect for my Switchback XT, I didn't really like it.
http://www.shopatron.com/product/part_number=600-PC/182.0.1933.0.0.0.0
http://www.shopatron.com/product/part_number=600-PC/182.0.1933.0.0.0.0
11-01-2007 | 01:22 PM
#5
Typical Buck
Joined: Nov 2004
Posts: 553
Likes: 0
From: Camden, SC
RE: Muzzy zero effect for marquis?
ORIGINAL: MeanV2
Hostage is a great rest for full containment. For a Dropaway you really can't beat a Limb Driver
Dan
Hostage is a great rest for full containment. For a Dropaway you really can't beat a Limb Driver
Dan
Did they change the bristles or are they the same as they where when Catawba made them? I had one and within a month and a half the bottom bristles were wore out and the arrow would fall in between the bristles.
11-01-2007 | 03:05 PM
#6
Giant Nontypical
Joined: Feb 2003
Posts: 7,051
Likes: 0
From: Jackson, Missouri
RE: Muzzy zero effect for marquis?
I have already been in contact with Muzzy about the Zero Effect fitting the Marquis... (imagine that )
I think I had one of the first Marquis's to roll off the line, and at the time Mark at Muzzy hadn't had a chance to look at one yet. I took a few closeup pics and e-mailed them to him, and he said the roller guard is missing a threaded hole they use on the Mathews to make the roller guard ZE work...
I don't think it'll take much modification. Give them a bit of time, and he'll get it done, I'm sure. In the mean time, I've been shooting my Diamond Hostage rest on it with good results, and I just put a Vapor Trails Limbdriver on it this week to see how it would do. So far, so good. That's the combo I'll have with me in the morning on the special hunt on an Illinois refuge I got drawn for where word is there's some B&C monsters roaming around!! [:-]
)I think I had one of the first Marquis's to roll off the line, and at the time Mark at Muzzy hadn't had a chance to look at one yet. I took a few closeup pics and e-mailed them to him, and he said the roller guard is missing a threaded hole they use on the Mathews to make the roller guard ZE work...
I don't think it'll take much modification. Give them a bit of time, and he'll get it done, I'm sure. In the mean time, I've been shooting my Diamond Hostage rest on it with good results, and I just put a Vapor Trails Limbdriver on it this week to see how it would do. So far, so good. That's the combo I'll have with me in the morning on the special hunt on an Illinois refuge I got drawn for where word is there's some B&C monsters roaming around!! [:-]
