Summit bungee cord,
02-02-2006 | 07:50 PM
#1
Thread Starter
Fork Horn
Joined: Sep 2005
Posts: 380
Likes: 0
From: Brooklyn, NY
Summit bungee cord,
I just received my Summit X5 today and for the life of me I can't figure out how to put the bunge cord on. The instruction picture is not clear. Am I right that there is only one S hook on it or did I lose one?! I'm starting to really freak out! Can someone please explain it in simple terms for a guy with two left hands. Thanks.
02-02-2006 | 07:57 PM
#2
Senior Member
Joined: Aug 2003
Posts: 4,103
Likes: 0
From: Ocean Springs, MS
RE: Summit bungee cord,
1. Take the right side of the bungee cord and hook it to the C loop on the top part of the stand.
2. Bring the cord around to the second C loop, and put it through the side bracket.
3. Pull tight.
4. Slide the hook through the receiver.
5. Grab the right part of the bungee cord.
6. Slide the right part through the LEFT receiver.
7. Hook the hook through the TOP of the right part.
8. Pull tight.
I'm just messing with you. You should have two S hooks.
2. Bring the cord around to the second C loop, and put it through the side bracket.
3. Pull tight.
4. Slide the hook through the receiver.
5. Grab the right part of the bungee cord.
6. Slide the right part through the LEFT receiver.
7. Hook the hook through the TOP of the right part.
8. Pull tight.
I'm just messing with you. You should have two S hooks.
02-03-2006 | 11:16 AM
#3
Thread Starter
Fork Horn
Joined: Sep 2005
Posts: 380
Likes: 0
From: Brooklyn, NY
RE: Summit bungee cord,
Funny guy ZAK123. Actually I was refering to the sturrup bungee, but thanks anyway. Also you had it backwards... The C loop went into theZ frame which went to the RIGHT Receiver.
