Omega question
02-11-2005 | 12:21 PM
#1
Thread Starter
Giant Nontypical
Joined: Jul 2003
Posts: 5,062
Likes: 0
From: Minnesota
Omega question
I picked up a new Omega a while back, and I was wondering about the sights on it, do they usually come adjusted at all, or are they all different? I was wondering how you can tell at first, if it is the bullet you are using or if the sights are off? 
02-11-2005 | 01:32 PM
#2
Typical Buck
Joined: Dec 2004
Posts: 771
Likes: 0
From: Michigan
RE: Omega question
T/C Rifles are test fired before leaving the factory but not dialed in.
From the factory the sights should be inside 2" at 50 yards with a 240gr mag express sabot and 2 50gr pellets. You should be on the paper at 50 yards so you can start working up a load and bullet and dial in further.
From the factory the sights should be inside 2" at 50 yards with a 240gr mag express sabot and 2 50gr pellets. You should be on the paper at 50 yards so you can start working up a load and bullet and dial in further.
