Cleaning firing pin on Huntsman
11-30-2003 | 11:06 AM
#1
Thread Starter
Fork Horn
Joined: Feb 2003
Posts: 277
Likes: 0
From: Wahoo Nebraska USA
Cleaning firing pin on Huntsman
I am wondering how you can clean the firing pin on a H&R Huntsman. I have a Rem 700ML and if the firing pin isn' t taken apart and cleaned once in awhile,it will get sticky from burnt powder,and won' t fire. Zeak
11-30-2003 | 12:03 PM
#2
Nontypical Buck
Joined: Feb 2003
Posts: 3,092
Likes: 0
RE: Cleaning firing pin on Huntsman
I simply spray some WD directly on the face of the action at the firing pin then blow it through with a bit of pressurized air. I HOPE that is adequate as there isn' t much choice short of driving out the pins and disassembling the action.
