HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Black Powder (https://www.huntingnet.com/forum/black-powder-23/)
-   -   Duplexing Blackhorn209 (https://www.huntingnet.com/forum/black-powder/331159-duplexing-blackhorn209.html)

Grouse45 10-09-2010 02:54 PM


Originally Posted by spaniel (Post 3698884)
Edited: Forget it, after reading more of this thread I'm reminded why I don't bother with any board frequented by Grouse or SL anymore. Question is, is Grouse man enough to admit he was wrong and apologize? I doubt it.

Spaniel,
Apologize for what???? That a customer service person at Western Powders said it was ok??? Does that mean now it's ok in your eyes? Those same people told the world you could use all 209 primers as well. Those same people never told you BH209 would only ignite in certain breech plugs reliable.

After looking at your projects on other boards, you would believe anything. I can understand you stay away from boards i'm on, because i will call you out on many things. Now to make that comment about Sabotloader, i think 90% of the people on this board think your nuts now.

MD, you did supply the email as requested. And i commend you for that. Now it's time for me to supply my info from the powder makers not the sellers. I'm actually hunting and should have the info supplied in a couple weeks.

MountainDevil54 10-09-2010 04:13 PM

see, no matter what answer or proof you give, its never enough :D

josh...just josh 10-09-2010 04:35 PM

"This the thread that never ends...yes it goes on and on my friends.. so people started posting, not knowing what is was, but they'll continue posting forever just because...this the thread that never ends..."

SteveBNy 10-09-2010 06:00 PM


see, no matter what answer or proof you give, its never enough
Start making a habit of posting support rather then it being a rare occurance and it will be more then enough.

Someone did it for you on this one or we would still be waiting.

MountainDevil54 10-09-2010 06:25 PM

i had nothing to prove from the beginning. You all were basically calling my liars, thinking im crazy enough to do something that isnt safe. I held my hand until someone behind me looked at my cards and told everyone else to lay their hand down because i was all over them like white on rice.

Now we all have to listen to the "expert" talk out his other hole on whats safe and what isnt.

Sure must have some REALLY good depth in the muzzle loading industry to get safe/unsafe duplex loads, especially for an average joe that he supposedly is.

Grouse45 10-09-2010 06:27 PM


Originally Posted by MountainDevil54 (Post 3699062)
see, no matter what answer or proof you give, its never enough :D

When it comes to safety, you are 100% correct.

Grouse45 10-09-2010 06:31 PM


Originally Posted by MountainDevil54 (Post 3699171)

Sure must have some REALLY good depth in the muzzle loading industry to get safe/unsafe duplex loads, especially for an average joe that he supposedly is.

You supplied your email/information very clearly. You did a great job. Now i will also supply information like you. Before you make statements i suggest you chill out on what's safe and what's not.

MountainDevil54 10-09-2010 06:38 PM

Its eating you up that it was given a thumbs up approval isnt it? LOL

What will you think once the rifle is running straight blackhorn?

sabotloader 10-09-2010 07:33 PM

MountainDevil54


What will you think once the rifle is running straight blackhorn?
What would be the issue with what you have proposed? I think should just work dandy... Have you tried shooting BH in a sidehammer with a hot #11 mag cap or maybe even a Musket Cap?

I am thinking if the the bolster opening is large enough and you just drop a few grains in the bore - then tap it out and over under the nipple, then dump the rest - it might just go boom for you.

I also do not think it would be consistently successful enough to hunt with but it would be an interesting experiment.

Back to the top... I do not think shooting a pure load of BH was ever the question - it was the unknowns of duplexing a Nitro based powder.

lemoyne 10-10-2010 05:43 AM

sabotloader
While I have been laid up for a while I do that on a regular bases. It works 100% of the time. With Blackhorn in a traditional it acts very similar to 777, I use about the same amount that I prime the flint lock with. It shows no difference in the pressure with only a prime to set it off. I would not recommend any more than that because of the possibility of a detonation.


All times are GMT -8. The time now is 10:00 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.