confused by 777
#14
I know I shouldn't but,,,hahahaha that's funny. Sorry 'bout that. Crap that must have hurt. Glad to hear you didn't get hurt too bad.
Now, having read that, I went and checked my boxes of T7 pellets. The box says 50 grain equivalent and 50/50, but no where on the box does it actually say EACH pellet is a 50 grain pellet.
Now I know this isn't an issue for someone who has been ML'ing for years, but I sure can see how a new comer could make this very same mistake. piketon_hunter#9I think Hodgon might be interested in this incident and you should inform of such. (Without the litigation.
)
Now, having read that, I went and checked my boxes of T7 pellets. The box says 50 grain equivalent and 50/50, but no where on the box does it actually say EACH pellet is a 50 grain pellet.
Now I know this isn't an issue for someone who has been ML'ing for years, but I sure can see how a new comer could make this very same mistake. piketon_hunter#9I think Hodgon might be interested in this incident and you should inform of such. (Without the litigation.
)
#15
Nontypical Buck
Joined: Jan 2008
Posts: 1,408
Likes: 0
From:
This reminds me of when my dad first taught me to shoot a 12-gauge. I'd been shooting a 20 and he said a 12 "kicked like hell". Looking back I know my dad is extremely recoil sensitive (he thinks a .22 has recoil) but didn't know it then.
We set up a couple old oil cans, I held the bead of the side-by-side on the first one, flinched, and pulled the trigger. There was a huge BOOM, the oil can exploded, and I was rocked back on one foot. My shoulder hurt like hell (the next day, the Philips head screw in the steel buttplate was clearly visible in the bruise on my shoulder).
My dad laughed, told me to be a man and touch off the other barrel. Being 14 and not willing to be a wuss in front of my dad, I repeated the procedure....nothing. I opened the gun, and BOTH BARRELS HAD FIRED!!! The gun was broken inside and we got it fixed.
After that, nothing has impressed me with recoil since.
We set up a couple old oil cans, I held the bead of the side-by-side on the first one, flinched, and pulled the trigger. There was a huge BOOM, the oil can exploded, and I was rocked back on one foot. My shoulder hurt like hell (the next day, the Philips head screw in the steel buttplate was clearly visible in the bruise on my shoulder).
My dad laughed, told me to be a man and touch off the other barrel. Being 14 and not willing to be a wuss in front of my dad, I repeated the procedure....nothing. I opened the gun, and BOTH BARRELS HAD FIRED!!! The gun was broken inside and we got it fixed.
After that, nothing has impressed me with recoil since.
#16
ORIGINAL: piketon_hunter#9
yea i did, i was just reading that someone else was confused by the size diff of the 777, i for some reason thought that every square in the box was 50 grains, not every pellet. completly ignorant of me i knw... i didnt notice anything abnormal when i cleaned it
yea i did, i was just reading that someone else was confused by the size diff of the 777, i for some reason thought that every square in the box was 50 grains, not every pellet. completly ignorant of me i knw... i didnt notice anything abnormal when i cleaned it
#17
Typical Buck
Joined: Aug 2004
Posts: 986
Likes: 0
From: Mesa, Arizona
The good thing is that you probably did not burn all that powder but you did increase the weight of whatever bullet you were using by about three or four pellets weight. Most rifles will not burn more than about 200gr. of powder unless the barrel is really long and the bullet is really tight. When I first shot T7 in my Omega I did not know about the crud ring and shot one load with a pretty small gap between the loose T7 and the bullet. The recoil was severe enough to put a nice cut on my eyebrow and make me wonder just what happened. I stopped shooting at that point and went home and cleaned the rifle. That is when I found the crud ring and have been trying to deal with it ever since. My Omega did not show any adverse signs from the episode but it sure did kick. In your case I might send the rifle back to T/C as that is definately way over maximum recommended loading.
#18
Boone & Crockett
Joined: Apr 2007
Posts: 10,918
Likes: 1
From: River Ridge, LA (Suburb of New Orleans)
Read the label, read the label, read the label. 
Glad you survived. If the breech locks up as tight as it did before I would think the gun is fine.
EDIT: By the way, TC doesn't proof fire their guns - but you took care of that for them. You need to have aproof markstamp made with your initials so you can stampthe barrel.

Glad you survived. If the breech locks up as tight as it did before I would think the gun is fine. EDIT: By the way, TC doesn't proof fire their guns - but you took care of that for them. You need to have aproof markstamp made with your initials so you can stampthe barrel.





