Apex is sighted and ready
#1
Thread Starter
Joined: Jul 2006
Posts: 5,180
Likes: 0
From:
Got the Apex this morning. Spent some time cleaning it up and making sure everything was A-ok and it was.
I couldnt use my bushnell banner 3-9x40 because the mounts i had were to low
I ended up using the cheap simmins 3-9x32 and sighted it in.
I started off with 70 grains Pyrodex Select and a 285g hornady great plains conical. They load really easy which worried me. Now makes me wish i would have bought a pack of 275g powerbelts yesterday. DOH!
I am letting the barrel cool between shots and so far its been shooting great. Put up a new target now, Took one shot and perfect @ 6 o'clock hold up just a little to the right. I am going to load up another shot, let the barrel cool and then take one more and call it a day.
I couldnt use my bushnell banner 3-9x40 because the mounts i had were to low
I ended up using the cheap simmins 3-9x32 and sighted it in.I started off with 70 grains Pyrodex Select and a 285g hornady great plains conical. They load really easy which worried me. Now makes me wish i would have bought a pack of 275g powerbelts yesterday. DOH!
I am letting the barrel cool between shots and so far its been shooting great. Put up a new target now, Took one shot and perfect @ 6 o'clock hold up just a little to the right. I am going to load up another shot, let the barrel cool and then take one more and call it a day.
#2
Thread Starter
Joined: Jul 2006
Posts: 5,180
Likes: 0
From:
Ok after 12 shots with Pyrodex Select and the POI kept changing i was about to junk the scope when i remembered i still had a half pound of pyrodex P left.
7 shots and it was holding all day long and kept shooting the same POI on a clean/dirty bore.
Man these rifles are like women, They throw a fit until you give them what they want
Last 3 shots i did were ok, about 2" @ 58 yards but those will shrink once i put it on the gun rest and go for it.
I saved the last conical so i can slug the bore, send it to BS and see what he can make me.
Couldn't help my self. I saw some plastic touching the barrel so out came the tape and file. A few minutes worth of work and its all clean and no longer touching. A piece of paper also slips easily between the barrel and stock with a tiny bit of drag.
I may add one thin aluminum spacer later on to just slightly float the barrel.


Some more pictures. I love that black on black look. Might just keep her and put a little money into a new scope and such.





7 shots and it was holding all day long and kept shooting the same POI on a clean/dirty bore.
Man these rifles are like women, They throw a fit until you give them what they want

Last 3 shots i did were ok, about 2" @ 58 yards but those will shrink once i put it on the gun rest and go for it.
I saved the last conical so i can slug the bore, send it to BS and see what he can make me.
Couldn't help my self. I saw some plastic touching the barrel so out came the tape and file. A few minutes worth of work and its all clean and no longer touching. A piece of paper also slips easily between the barrel and stock with a tiny bit of drag.
I may add one thin aluminum spacer later on to just slightly float the barrel.


Some more pictures. I love that black on black look. Might just keep her and put a little money into a new scope and such.





#3
Pretty sharp looking outfit you have there... what are you going to hunt with that? It looks like it will be a good shooter. Do you shoot conicals out of your rifles much?
#4
Thread Starter
Joined: Jul 2006
Posts: 5,180
Likes: 0
From:
Concials and round balls are all i shoot.
Mulies for sure. I have to contact the DOW and see if a .45 muzzle loader is legal for elk during rifle season. If so, either a 300g powerbelt platinum or a BS conical i will use.
More than likely will let my brother in law hunt in New Mexico with it if he ever gets to guts to put in a for a muzzle loader tag.
She's turning out to be a shooter now that i switched to Pyro-P
Tomorrow i am going to take a shot off the rest at 71 yards and see where she hits and then move back to 58 yards and try a maxi hunters and see how that does.
I really hate when i cut myself short on bullets[:@]
Mulies for sure. I have to contact the DOW and see if a .45 muzzle loader is legal for elk during rifle season. If so, either a 300g powerbelt platinum or a BS conical i will use.
More than likely will let my brother in law hunt in New Mexico with it if he ever gets to guts to put in a for a muzzle loader tag.
She's turning out to be a shooter now that i switched to Pyro-P
Tomorrow i am going to take a shot off the rest at 71 yards and see where she hits and then move back to 58 yards and try a maxi hunters and see how that does.
I really hate when i cut myself short on bullets[:@]




