Smoothbore shooting today
11-25-2007 | 07:45 PM
#1
Thread Starter
Nontypical Buck
Joined: Nov 2003
Posts: 1,047
Likes: 0
From: southwest Ohio
Smoothbore shooting today
Decided to take a day off from archery hunting deer and relax today. Got the T/C NewEnglander 12ga out and went for a walk this afternoon. No rabbits volunteered to help me test a new load [:@]so I settled for some patterning on cardboard. Used 80 grains T-7 ffg, 2 card wads, 1 cushion wad (waxed tow - I make my own), 1 3/8 oz mixed (#4-6-7 1/2) shot, and an overshot card wad. Beautiful pattern @ 30 yards with the T/C full tube!!!
I use a Mag-Spark nipple
with anything other than real BP, so ignition is great every time. 
Really a bit too tight for rabbit hunting, but come spring turkey season I'll know what to use!
I use a Mag-Spark nipple
with anything other than real BP, so ignition is great every time. Really a bit too tight for rabbit hunting, but come spring turkey season I'll know what to use!
11-25-2007 | 08:29 PM
#3
Thread Starter
Nontypical Buck
Joined: Nov 2003
Posts: 1,047
Likes: 0
From: southwest Ohio
RE: Smoothbore shooting today
That's not my gun, just a pic of the nipple . I got mine directly from Ben Hubbard.
http://www.hubbardsoutdoorproducts.com/
I have a few of them, and they work very well for igniting the substitute powders. A little slow, but then that's what makes muzzleloading interesting.
. I got mine directly from Ben Hubbard. http://www.hubbardsoutdoorproducts.com/
I have a few of them, and they work very well for igniting the substitute powders. A little slow, but then that's what makes muzzleloading interesting.
11-25-2007 | 08:31 PM
#4
Dominant Buck
Joined: Feb 2003
Posts: 21,193
Likes: 0
From: Wisconsin
RE: Smoothbore shooting today
I've been shooting 80 grains of American Pioneer Powder 2f and 90 grains of #5 with a full choke in my T/C 12 gauge New Englander. So far I have been doing well on the Ruffed Grouse. I have been loading a over the powder card, half a fiber wad, the shot, and then two over the shot cards. It seems to pattern real well.
The old dog helped me with this one. He was kind of proud of his finding and bringing this ruffed grouse back to me. I kind of worry it might be his last. But you never know with this old rascal. He's 14 years old, but still goes for walks in the woods with me...
The old dog helped me with this one. He was kind of proud of his finding and bringing this ruffed grouse back to me. I kind of worry it might be his last. But you never know with this old rascal. He's 14 years old, but still goes for walks in the woods with me...
11-25-2007 | 08:50 PM
#5
Thread Starter
Nontypical Buck
Joined: Nov 2003
Posts: 1,047
Likes: 0
From: southwest Ohio
RE: Smoothbore shooting today
Hate to think about grouse hunting. My favorite spot in years past is now a subdivision. [:@]
I really like the NewEnglander. I did replace the factory bead with a fiber-optic bead, and use a tang "ghost ring" sight for turkey hunting. Makes it easier to keep the patterns centered with a deliberate aimwhen I don't shoot the gun very often. For most shooting I never even notice the "ghost ring", the NewEnglander synthetic stock fits me well.
Looks like you have a good hunting partner there! Bet he's not spoiled, either.
I really like the NewEnglander. I did replace the factory bead with a fiber-optic bead, and use a tang "ghost ring" sight for turkey hunting. Makes it easier to keep the patterns centered with a deliberate aimwhen I don't shoot the gun very often.
For most shooting I never even notice the "ghost ring", the NewEnglander synthetic stock fits me well.Looks like you have a good hunting partner there! Bet he's not spoiled, either.
