Harvester crushrib sabot
02-19-2006 | 07:45 PM
#21
Boone & Crockett
Joined: Aug 2004
Posts: 11,703
Likes: 0
From: Idaho
RE: Harvester crushrib sabot
Triple Se7en
This is not a definenitive test, nor is it a magnum test, but I have been doing some sabot testing and Iamshooting them with 100 grains of loose T7 and there have worked very well. I recovered the sabots and the cups looked fine no stress at all. None of my rifles require the use of the "crush rib" so loadingand shooting them was strictly a thing that I wanted to try them. Because they were "somewhat" loose in the A&H, when shot they were losing about 1-200fps in velocity. In a tight boreI believe they would work well.
This is not a definenitive test, nor is it a magnum test, but I have been doing some sabot testing and Iamshooting them with 100 grains of loose T7 and there have worked very well. I recovered the sabots and the cups looked fine no stress at all. None of my rifles require the use of the "crush rib" so loadingand shooting them was strictly a thing that I wanted to try them. Because they were "somewhat" loose in the A&H, when shot they were losing about 1-200fps in velocity. In a tight boreI believe they would work well.
