CVA Optima Pro
#1
Spike
Thread Starter
Join Date: Oct 2005
Posts: 9
CVA Optima Pro
Hey Guys,
My nephew has a brand new Optima. At the range yesterday, it was good
at 50 yds but sprayed at 100. He is a little dejected about it. He was shooting 100 gr 777 pellets and 245 grain powerbelts. Anyideas on
correcting this?
Thanks,
WOD in VA
My nephew has a brand new Optima. At the range yesterday, it was good
at 50 yds but sprayed at 100. He is a little dejected about it. He was shooting 100 gr 777 pellets and 245 grain powerbelts. Anyideas on
correcting this?
Thanks,
WOD in VA
#2
Nontypical Buck
Join Date: Jul 2003
Posts: 2,922
RE: CVA Optima Pro
ORIGINAL: wod288
Hey Guys,
My nephew has a brand new Optima. At the range yesterday, it was good
at 50 yds but sprayed at 100. He is a little dejected about it. He was shooting 100 gr 777 pellets and 245 grain powerbelts. Anyideas on
correcting this?
Thanks,
WOD in VA
Hey Guys,
My nephew has a brand new Optima. At the range yesterday, it was good
at 50 yds but sprayed at 100. He is a little dejected about it. He was shooting 100 gr 777 pellets and 245 grain powerbelts. Anyideas on
correcting this?
Thanks,
WOD in VA
2) A heavier Powerbelt (295s).
Make sure you turn the Powerbelt plastic skirt a few times -- even take it off & put it back on a few times to loosen it.
3) Buy some 30-grain pellets & try 80 - 90 - 110 -120 grains also.
4) Try a couple of different sabot/bullets in different weights. Good inexpensive choices with a nice variety are the Hornady XTP 300 grain and the T/C Cheapshot 240 grain.
5) Use two ramrods. One has a jag for seating the bullet -- the other has a bore brush for swabbing. Use plain Windex & brush-swab after every 2nd shot.