Low Velocity/Noise Loads
11-11-2003 | 10:49 AM
#1
Thread Starter
Nontypical Buck
Joined: Feb 2003
Posts: 4,472
Likes: 1
From: Audubon & Red Rock, Penna.
Low Velocity/Noise Loads
I saw an ad for low velocity (sub-sonic) loads for hunting geese in highly populated areas. My question is - geese are pretty tough. Wouldn' t going to a weaker load result in more cripples? That would be something I' d want to avoid - especially in higher populated areas.
Scott Meier
White Oak Lodge
Scott Meier
White Oak Lodge
11-12-2003 | 08:44 AM
#2
Typical Buck
Joined: Feb 2003
Posts: 931
Likes: 0
From: Coffeyville KS USA
RE: Low Velocity/Noise Loads
they also make a 30-some-inch long barrel extension to use with those loads. its screws into your existing choke tube threads.
that' s right. the overall length of the barrel is going to be 54+ inches.
i think the geese in highly populated areas are relatively tame. should be no problem getting them within 30 yds or so, so even the low velocity low noise loads should work. they make this specifically for situations where there would be no hunting because of the noise from standard or hi-vel shells.
http://www.cabelas.com/cabelas/en/te...rch&hasJS=true
that' s right. the overall length of the barrel is going to be 54+ inches.
i think the geese in highly populated areas are relatively tame. should be no problem getting them within 30 yds or so, so even the low velocity low noise loads should work. they make this specifically for situations where there would be no hunting because of the noise from standard or hi-vel shells.
http://www.cabelas.com/cabelas/en/te...rch&hasJS=true
