HuntingNet.com Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Traditional Archery (https://www.huntingnet.com/forum/traditional-archery-19/)
-   -   New Shop Additions (https://www.huntingnet.com/forum/traditional-archery/270804-new-shop-additions.html)

txjourneyman 10-31-2008 05:32 AM
RE: New Shop Additions
 
ORIGINAL: Centxrecurve

ORIGINAL: burniegoeasily

I’m jealous. I’m in need of a new drum sander. Well, actually I think I’m going to get a new motor for the lam gig I made. It would be much cheaper. That is, once I quit playing with the self bows. I know I keep saying Im going to get back into the plywood bow buisness. It would save me a butt load of time. I just like the elegance of a board, or self bow. Besides, I’ve got some snake skins waiting for some snaky Osage bows next spring.
What size motor do you need I can get motors fairly cheap If I dont have one laying around. As long as its 825-1100 rpm range. 1/4hp to3/4 hp real easy
Me too Kent. I have several different small motors laying around. Let me know what HP you are looking for.
Also right behind the $200 rolling deer camp is a nice Osage tree with a limb thats about 7' long and pretty straight. I think I'll cut it down this weekend. Maybe we can meet up in abilene over the winter so I can get 1/2 the staves to you. Of course there will be a hunt involved out there.

burniegoeasily 10-31-2008 07:32 AM
RE: New Shop Additions
 
ORIGINAL: txjourneyman

ORIGINAL: Centxrecurve

ORIGINAL: burniegoeasily

I’m jealous. I’m in need of a new drum sander. Well, actually I think I’m going to get a new motor for the lam gig I made. It would be much cheaper. That is, once I quit playing with the self bows. I know I keep saying Im going to get back into the plywood bow buisness. It would save me a butt load of time. I just like the elegance of a board, or self bow. Besides, I’ve got some snake skins waiting for some snaky Osage bows next spring.
What size motor do you need I can get motors fairly cheap If I dont have one laying around. As long as its 825-1100 rpm range. 1/4hp to3/4 hp real easy
Me too Kent. I have several different small motors laying around. Let me know what HP you are looking for.
Also right behind the $200 rolling deer camp is a nice Osage tree with a limb thats about 7' long and pretty straight. I think I'll cut it down this weekend. Maybe we can meet up in abilene over the winter so I can get 1/2 the staves to you. Of course there will be a hunt involved out there.
I appreciate it guys. Ill let yall know. I have not even checked. Ive got two motors at my big shop, ill check them out first and let yall know.

Tx
you bet. Im up for hunting just about any time. Your place above Ft. Phantom is not far at all from my house. And if you feel froggy, my land is another hour west in Jayton.

Kanga 10-31-2008 12:15 PM
RE: New Shop Additions
 
You guy's start ya own thread and stop jackin mine[8D]:D:D:D

Just ripped up some more lams have not put the tapers in them yet.

What ya'll think?



I was thinking about doing a diaginal cut from top to bottom on each one then glueing the 2 different colors into 1 lam;)

Centxrecurve 10-31-2008 12:37 PM
RE: New Shop Additions
 
Make for a colorful bow. Definately make it stand out.


All times are GMT -8. The time now is 02:21 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.