problem with arrow flight
 

Can some one explain this, I'm shooting 27" carbon express maxima hunters 250 and 350s with 100 grain slick trick heads out of a mathews xt 70 lb 26" drawand they are dead on at 20 to 40 yards, but when I install lumenocks or archers flame nocks they cork screw and hit 4" left,and when I put the others back inthere dead on. Do you think my foc is off and maybe I should go with a heavier head.I don't have any 125s this is why I"m asking. Thanks for any info

RE: problem with arrow flight
 

Do the luminocks or AF nocks fit on the string tighter than the CX nocks?

RE: problem with arrow flight
 

Man I'm sorry I thought this was the techical , can someone move this.Thanks

RE: problem with arrow flight
 

Not sure but will check,thanks Jimpic

RE: problem with arrow flight
 

I think FOC could be a real possibilty especially with the weight (check on that, but they are heavy IMO) of the LN on the rear end of the arrow.

RE: problem with arrow flight
 

Thanks for the reply BobCo19-65 I think I try some heavier heads

RE: problem with arrow flight
 

Just remember that you may have a spine issue then. Although from what I hear, carbons are not all that sensitive to spine.

RE: problem with arrow flight
 

Men,
Jimpic had the right question and probably THE SOLUTION !
Tj

RE: problem with arrow flight
 

DOn'T USElumenocks or archers flame nocks


problem solved - next question ?

RE: problem with arrow flight
 

MEN,
I'am with JIM @ BUSTER110%! get rid of them fancy gadgets and shoot real NOCS andYour problems will go away,
Tj