Community
Bowhunting Talk about the passion that is bowhunting. Share in the stories, pictures, tips, tactics and learn how to be a better bowhunter.

Easton Tracer Nock (Short Tutorial Video)

Thread Tools
 
Old 08-09-2008 | 10:15 PM
  #1  
Rob/PA Bowyer's Avatar
Thread Starter
Boone & Crockett
 
Joined: Oct 1998
Posts: 18,322
Likes: 0
From: Hughesville, PA USA
Default Easton Tracer Nock (Short Tutorial Video)

Okay guys, I took the time this evening to do a little tutorial on the Tracer Nock. Actually I did it this morning too but I messed up and had my boom mic plugged into my GL2 but did not turn it on. If it wasn't plugged in the camera mic would have took over so I didn't get a single bit of audio.

Thusly I took the whole video again this evening which was better because of the lower light. This morning it was too bright to see it actually light and happen.

This is just a very short video as I took 6 shots with the nock. The nock lit 2 of 5 shots and light on impact on the 6th shot. I shot 4 at my 40 yard deer and 2 at my 30 yard coyote from my deck.

I honestly think the reason it didn't light was placement of my magnet that activates the nock as you will see in the video.

It did however light on the very first shot.

CLICK ME FOR VIDEO!

I'm working on getting the full video up on Photobucket but for now it's just the tutorial and first shot.
Rob/PA Bowyer is offline  
Reply
Old 08-09-2008 | 10:28 PM
  #2  
whitetailbowhunter's Avatar
Nontypical Buck
 
Joined: Nov 2007
Posts: 3,071
Likes: 0
From:
Default RE: Easton Tracer Nock (Short Tutorial Video)

Nice video. I like that nock better than the lumenok, The lomenock leaves some groves on the back of the arrow after being shot, I don't like that.
whitetailbowhunter is offline  
Reply
Old 08-09-2008 | 10:28 PM
  #3  
WesternMdHardwoods's Avatar
Nontypical Buck
 
Joined: Feb 2007
Posts: 1,977
Likes: 0
From: Allegany County Maryland
Default RE: Easton Tracer Nock (Short Tutorial Video)

Rob, I think your magnet may be too low?? I have never had one malfunction with the nocks not turning on, it could be too close to the riser as well..?? Not sure you cant really tell from the video, but I cant believe they are not turning on for you??

Maybe a bad nock?? Hopefully its just a misplaced magnet?? None the less aint these things awesome!!!!!!!!
WesternMdHardwoods is offline  
Reply
Old 08-09-2008 | 10:34 PM
  #4  
whitetailbowhunter's Avatar
Nontypical Buck
 
Joined: Nov 2007
Posts: 3,071
Likes: 0
From:
Default RE: Easton Tracer Nock (Short Tutorial Video)

How much do the Tracers weigh?
whitetailbowhunter is offline  
Reply
Old 08-09-2008 | 10:37 PM
  #5  
Rob/PA Bowyer's Avatar
Thread Starter
Boone & Crockett
 
Joined: Oct 1998
Posts: 18,322
Likes: 0
From: Hughesville, PA USA
Default RE: Easton Tracer Nock (Short Tutorial Video)

ORIGINAL: WesternMdHardwoods

Rob, I think your magnet may be too low?? I have never had one malfunction with the nocks not turning on, it could be too close to the riser as well..?? Not sure you cant really tell from the video, but I cant believe they are not turning on for you??

Maybe a bad nock?? Hopefully its just a misplaced magnet?? None the less aint these things awesome!!!!!!!!
The magnet is definately not too low. It's sitting right on the Berger buttons/holes in the riser exactly where my arrow passes across the riser.

I'm wondering if the riser is too far away from the riser/rest. I'll experiment on locations for the magent. I may have to put it on the rest itself...? If I can?
Rob/PA Bowyer is offline  
Reply
Old 08-09-2008 | 10:37 PM
  #6  
Rob/PA Bowyer's Avatar
Thread Starter
Boone & Crockett
 
Joined: Oct 1998
Posts: 18,322
Likes: 0
From: Hughesville, PA USA
Default RE: Easton Tracer Nock (Short Tutorial Video)

ORIGINAL: whitetailbowhunter

How much do the Tracers weigh?
On my digital scale, 29 grains.

The standard nock weighs 12 grains.


Rob/PA Bowyer is offline  
Reply
Old 08-10-2008 | 12:10 AM
  #7  
carpsniper's Avatar
Nontypical Buck
 
Joined: Jun 2005
Posts: 1,671
Likes: 0
Default RE: Easton Tracer Nock (Short Tutorial Video)

I'm going to be using some of the new Firenocks this year. They're pretty sweet.No magnets to mess with.
carpsniper is offline  
Reply
Old 08-10-2008 | 04:57 AM
  #8  
Rickmur's Avatar
Boone & Crockett
 
Joined: Feb 1997
Posts: 10,485
Likes: 0
From: Cheasapeke and Delaware Bay Region
Default RE: Easton Tracer Nock (Short Tutorial Video)

Nice work with the video. Bow's kinda noisy though. Just kidding, not pushing any buttons here.
Rickmur is offline  
Reply
Old 08-10-2008 | 07:06 AM
  #9  
nybowhunter's Avatar
Typical Buck
 
Joined: Feb 2003
Posts: 790
Likes: 0
From: Western NY
Default RE: Easton Tracer Nock (Short Tutorial Video)

Rob,
Do they really help you see your arrow in flight?My eyes have gotten old and I still have a problem following my arrow with my Diamond Triumph bow. Also, how much do they cost? BTW...your can talk pretty good with a nock in your mouth...maybe you should consider a tv show.....ha!
nybowhunter is offline  
Reply
Old 08-10-2008 | 07:27 AM
  #10  
Mike from Texas's Avatar
Nontypical Buck
 
Joined: Feb 2003
Posts: 2,214
Likes: 0
From: Arlington TX USA
Default RE: Easton Tracer Nock (Short Tutorial Video)

ORIGINAL: carpsniper

I'm going to be using some of the new Firenocks this year. They're pretty sweet.No magnets to mess with.
Me too. You can also choose nock color which is field replaceable and batteries are field replaceable as well.
Mike from Texas is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.