Easton 2117 bolts. I was told their the best for cross bows
02-26-2006 | 10:08 AM
#11
Nontypical Buck
Joined: Feb 2006
Posts: 3,147
Likes: 0
From: arkansas
RE: Easton 2117 bolts. I was told their the best for cross bows
Hi guys, 1st post, but have some info to share. I'm shooting an Excal, Exomax about 350 fps w/ 357 gr Lazer II's. Talked to Dan Miller in Sardis, Ohio, and got a real education. He advised same shaft, but 4' vanes vs. 5", brass inserts vs. aluminum. I'm using 100 gr. Slick Tricks, and the results are awesome. He only sells Excals, but knows alot about others, very friendly, and will chat on phone almost anytime, at 740 483 2030. BTW, this is a very nice forum!!! Thank you Awshucks
02-26-2006 | 06:02 PM
#13
Typical Buck
Joined: Nov 2003
Posts: 974
Likes: 0
From: Southampton, Ontario, Canada
RE: Easton 2117 bolts. I was told their the best for cross bows
I shoot an excalibur Exocet I use 21" 2012 fluted shaft botls and 90 Gr. 4 blade muzzy. Works great for me +-4" from 10 to 40 yds. Just center and shoot
02-27-2006 | 06:30 PM
#14
Joined: Feb 2003
Posts: 5,417
Likes: 0
From: chiefland Florida USA
RE: Easton 2117 bolts. I was told their the best for cross bows
ORIGINAL: moxie1884
I went fro Aluminum to Carbon bolt by accident but quickly found out the fly far better. The picture below is a measured 10 yard shot done from a bench. The aluminum are cameo and the carbons are black. The picture is a little big.
http://users.rcn.com/moxie1884/PA010015.JPG
I went fro Aluminum to Carbon bolt by accident but quickly found out the fly far better. The picture below is a measured 10 yard shot done from a bench. The aluminum are cameo and the carbons are black. The picture is a little big.
http://users.rcn.com/moxie1884/PA010015.JPG
moxie ; what kind did you go to. I am gonna go to Carbon this year and need a good carbon.
PM me with the info also.
