No - peep on tech riser
03-14-2005 | 05:13 PM
#1
Thread Starter
Joined: Jun 2004
Posts: 41
Likes: 0
From: Maine
No - peep on tech riser
Has anyone else with a Hoyt Tech Riser had trouble getting a no - peep to mount on the string side of the riser. I was able to mount one on the target side, but it is getting pretty far away at that point.
03-14-2005 | 08:39 PM
#2
Typical Buck
Joined: Feb 2003
Posts: 868
Likes: 0
From: USA
RE: No - peep on tech riser
No go on the string side for my Razortec.
I actually prefer the sight side of the riser over the string side. Keeps me from having to shift my focus between the pins and the NoPeep.
Additionally, the longer distance will increase the accuracy, similar to a longer sight radius on a rifle.
I actually prefer the sight side of the riser over the string side. Keeps me from having to shift my focus between the pins and the NoPeep.
Additionally, the longer distance will increase the accuracy, similar to a longer sight radius on a rifle.
