My New Justice!
01-19-2005 | 09:19 AM
#11
Giant Nontypical
Joined: Feb 2003
Posts: 5,525
Likes: 0
From: creemore Ontario Canada
RE: My New Justice!
Lady Arwen !
What type and model of rest are you using?
Sorry I just seen where you have the Trophy Taker rest is this correct? If this is the case get some mole skin and put it on your launcher arm where the arrow rests on the arm, this should help eliminate almost all of the noise your experiencing.I've just read your post on your rest and i hope you've gotten it worked out .Just remember that the string goes to the far side of the cable so that it doesn't get in the way of your fletching's .I can't see what has been done ,but it sound's as though it's a timing issue ,so you'll have to try different adjustment with string length.I'm thinking it might be too tigh which is letting the arm raise too quickly.There should be a little slack in you string when it's in the resting position[Meaning not drawn].If you pull the string directly across to your string level ,it should be served about 3/4" above the level point on the down cable.I hope this isn't too confusing to you .It's just much easier to explain when I doing it.
nubo
What type and model of rest are you using?
Sorry I just seen where you have the Trophy Taker rest is this correct? If this is the case get some mole skin and put it on your launcher arm where the arrow rests on the arm, this should help eliminate almost all of the noise your experiencing.I've just read your post on your rest and i hope you've gotten it worked out .Just remember that the string goes to the far side of the cable so that it doesn't get in the way of your fletching's .I can't see what has been done ,but it sound's as though it's a timing issue ,so you'll have to try different adjustment with string length.I'm thinking it might be too tigh which is letting the arm raise too quickly.There should be a little slack in you string when it's in the resting position[Meaning not drawn].If you pull the string directly across to your string level ,it should be served about 3/4" above the level point on the down cable.I hope this isn't too confusing to you .It's just much easier to explain when I doing it.
nubo
