Bowtech Constitution
11-02-2004 | 05:11 AM
#12
Boone & Crockett
Joined: Feb 2003
Posts: 12,157
Likes: 0
From: Lehigh County PA USA
RE: Bowtech Constitution
Several of their new bows look great. I am really interested in how that Equalizer cam system will work. It basically looks like two single cams tied into each other.
11-02-2004 | 06:01 AM
#13
Nontypical Buck
Joined: Feb 2003
Posts: 3,058
Likes: 0
From: CT, USA
RE: Bowtech Constitution
New cam system looks/sounds real nice.Speeds seem comparable with the I/N-cam, though from the descriptions, it should draw somewhat similar to the F-cams.
I was all set to order an Ultra-Tec with spirals, but I think that 37" bow w/ 320's IBO will do the trick. Just wish BT had used my name suggestion instead of "old glory"
BTW..Kelly, was I on again this year or what?
I was all set to order an Ultra-Tec with spirals, but I think that 37" bow w/ 320's IBO will do the trick. Just wish BT had used my name suggestion instead of "old glory"
BTW..Kelly, was I on again this year or what?
11-02-2004 | 06:10 AM
#14
Giant Nontypical
Joined: Feb 2003
Posts: 6,455
Likes: 0
From: Burleson TX USA
RE: Bowtech Constitution
Just wish BT had used my name suggestion instead of "old glory"
Now I have to make a critical choice here which one do I get to replace my Patriot or do I go for the Constitution for 3d or a smaller one for treestand or a mid size one.
I can see this being a very bad year I want all of them and NO MONEYYYYYYYYYYYYYYYYY
So I will have to put all the names in a hat and draw one
11-02-2004 | 06:36 AM
#15
Nontypical Buck
Joined: Feb 2003
Posts: 3,058
Likes: 0
From: CT, USA
RE: Bowtech Constitution
Just wish BT had used my name suggestion instead of "old glory"
I wish Bowtech would have used the name suggestion I gave them.
Comprende?
11-02-2004 | 08:41 AM
#17
Joined: Feb 2003
Posts: 2,413
Likes: 0
From:
RE: Bowtech Constitution
I know they shoot fine, but I'm getting so I can't stand the looks of those super-long-riser bows. All those sharp angles will never have the beauty of the gentle curves of more traditional bows. What does that thing weight, 6 lbs?
11-02-2004 | 09:20 AM
#18
Nontypical Buck
Joined: Oct 2003
Posts: 3,784
Likes: 0
From: Pittsburgh, PA
RE: Bowtech Constitution
Suprised nobody added the new pics released today on AT. Guess I'll post em'.
Old Glory
37 1/2 ATA
7 1/4 Brace
Independance
Freedom Cam 5"
37 5/8 ATA
7 1/2 Brace
The NEW Tomkat Package
32 1/2 ATA
8 1/4 Brace
and 10 fps faster!
And there is also a note that the Constitution will be available up to 31" draw.
Old Glory
37 1/2 ATA
7 1/4 Brace
Independance
Freedom Cam 5"
37 5/8 ATA
7 1/2 Brace
The NEW Tomkat Package
32 1/2 ATA
8 1/4 Brace
and 10 fps faster!
And there is also a note that the Constitution will be available up to 31" draw.
11-02-2004 | 11:25 AM
#19
Nontypical Buck
Joined: Feb 2003
Posts: 1,532
Likes: 0
From: NW Ohio USA
RE: Bowtech Constitution
I hate to do this but here goes...
Available in 31" draw are the Constitution, Old Glory, Independence and the new TomKat will adjust to 31 1/2".
The BlackKnight, Allegiance, Defender, Mighty Mite VFT and Patriot VFT will adjust up to 30" draw.
The Justice VFT, Liberty VFT and Limited Edition PBR bows will adjust up to 30 1/2".
The new Miranda draw lengths will be 22"-27" and the new Rascal will adjust from 20"-25".
Available in 31" draw are the Constitution, Old Glory, Independence and the new TomKat will adjust to 31 1/2".
The BlackKnight, Allegiance, Defender, Mighty Mite VFT and Patriot VFT will adjust up to 30" draw.
The Justice VFT, Liberty VFT and Limited Edition PBR bows will adjust up to 30 1/2".
The new Miranda draw lengths will be 22"-27" and the new Rascal will adjust from 20"-25".