draw length
#1
Thread Starter
Joined: Oct 2004
Posts: 779
Likes: 0
From: Iowa
I've never owned a bow but i'm thinking about ordering this one
http://www.basspro.com/servlet/catal...rTarget=browse
I don't know which draw length to get though, how do you measure it? i hope its around 29" since this one doesn't have a range like many i've seen [&:]
http://www.basspro.com/servlet/catal...rTarget=browse
I don't know which draw length to get though, how do you measure it? i hope its around 29" since this one doesn't have a range like many i've seen [&:]
#2
Thread Starter
Joined: Oct 2004
Posts: 779
Likes: 0
From: Iowa
I ran a search and found two ways to find it, measure your wingspan and use the chart, and make a fist and put it against the wall and measure to the corner of your mouth. the first way though i got a 27" draw and the 2nd a 29" draw. Which way is more accurate do you think?
#3
Nontypical Buck
Joined: Jul 2004
Posts: 4,640
Likes: 0
From: Roodhouse Illinois
Honestly, go to a shop and have them do it acuratly, the ways you done it can be off by inches. Then while your there, see if they have the bow your looking at and see what it feels like to you, or check out some other bows there you like the looks off. Then if you buy the bow online, take it back to the shop and have them help you set it up correct.
#4
Joined: Sep 2004
Posts: 58
Likes: 0
From: NC/SC
I agree with Dairy King. There are formulas for draw length using your height, and arm span, but it CAN be off. Even if you measure up to a 29" draw, some people like shooting less than that because it feels more comfortable.
#5
How to Measure Your Draw Length
Draw Length can be determined by a measurement known as 'wingspan.' This is simply a measurement and has nothing to do with how you actually draw back your bow.
How to measure your wingspan:
1) Lean against a wall, standing as close to the wall as possible with back flat.
2) Extend your arms and fingers out as far as possible
3) Have someone make a pencil mark at the end of both your fingers tips
4) Measure this distance
This is your wingspan. Find this number in the chart below to find its matching Draw Length. (For example, a wingspan of 67" would be a draw length of 26")
Wingspan........................................Dr aw Length
(inches).......................................... .(inches)
63................................................ .........24
64................................................ .........24 1/2
65................................................ .........25
66................................................ .........25 1/2
67.................................26
68................................................ .........26 1/2
69................................................ .........27
70................................................ .........27 1/2
71................................................ .........28
72................................................ .........28 1/2
73................................................ .........29
74................................................ .........29 1/2
75................................................ .........30
76................................................ .........30 1/2
77................................................ .........31
78................................................ .........31 1/2
*** The Most Common Draw Length is 29 inches.
this Method of measuring is very accurate for determining your proper draw length.
Draw Length can be determined by a measurement known as 'wingspan.' This is simply a measurement and has nothing to do with how you actually draw back your bow.
How to measure your wingspan:
1) Lean against a wall, standing as close to the wall as possible with back flat.
2) Extend your arms and fingers out as far as possible
3) Have someone make a pencil mark at the end of both your fingers tips
4) Measure this distance
This is your wingspan. Find this number in the chart below to find its matching Draw Length. (For example, a wingspan of 67" would be a draw length of 26")
Wingspan........................................Dr aw Length
(inches).......................................... .(inches)
63................................................ .........24
64................................................ .........24 1/2
65................................................ .........25
66................................................ .........25 1/2
67.................................26
68................................................ .........26 1/2
69................................................ .........27
70................................................ .........27 1/2
71................................................ .........28
72................................................ .........28 1/2
73................................................ .........29
74................................................ .........29 1/2
75................................................ .........30
76................................................ .........30 1/2
77................................................ .........31
78................................................ .........31 1/2
*** The Most Common Draw Length is 29 inches.
this Method of measuring is very accurate for determining your proper draw length.
#6
Giant Nontypical
Joined: Feb 2003
Posts: 9,175
Likes: 0
Nice chart. Too bad I'm off of it.
My wingspan is 82", so I have to use the formula.
(Wingspan - 15) divided by 2 = draw length
82 - 15 = 67
67/2 = 33 1/2"
My actual draw length on compound bows with straight wrist and slightly bent or 'soft' elbow is 33". If I straightened the elbow and used high wrist it'd be 34". So the formula/chart gets you very close.
My wingspan is 82", so I have to use the formula.(Wingspan - 15) divided by 2 = draw length
82 - 15 = 67
67/2 = 33 1/2"
My actual draw length on compound bows with straight wrist and slightly bent or 'soft' elbow is 33". If I straightened the elbow and used high wrist it'd be 34". So the formula/chart gets you very close.
#7
Joined: Feb 2003
Posts: 5,293
Likes: 0
From: Blissfield MI USA
The best way to measure draw length is to take the actual bow you are going to buy and draw it to see how it fits you. If it is wrong have it changed before you take it home. Using a method of measuring your physical draw, be it the wing span method, or drawing a recurve with a marked fiber glass arrow in it is fine and dandy. It will get you close. The problem is not all bows are the same. Some can be as much as 1 inch off in either way from what they state they are.
If you measure your draw length and go by that and then order a bow at say 28 1/2 inches, when you get the bow the actual draw length may be close to 29 inches or bit more. No matter what the cam or spec sheet says. Also keep in mind that the design of the grip and the accessories you use can effect your percieved draw length. It will not change the physical draw length ie; power stroke. It will however change the relationship of your anchor points on your face if you use any. Even changing releases can effect this, as well as using a string loop or not.
You should really get to draw and shoot the bow you want the way you are going to shoot it (your release and the such) before you buy it. A good shop should have the equipment and parts to set the bow up so it fits you correctly before you sign the check. Buying one over the internet or mail order might get you close, but unless you know a fair amount about bows, especially that model and brand you may have a hard time fine tuning it to fit you right. It also helps to have someone there to watch you draw to make sure everything lines up good.
Sometimes it could mean the difference between shooting well and enjoying the sport and having nothing but problems and getting frustrated and giving up.
My advice is if you have a decent shop near you go there and see if they will work with you. Let them know the budget you are on and what you are looking for. Chances are they will let you shoot a few different bows and you may decide to just wait and save the money to get a better one. I think you will be much happier in the long run, even if you get a cheaper bow. At least you will have some sort of support if you have any questions or problems.
And if you go there and get measured, buy it on line and then take it back to get it set up you may not get treated very well. You will also most likely have to pay a fair amount for them to do the work. If a shop is willing to work with you and explain things I don't feel you should take the money away from them and buy it somewhere else. At least reward them with the sale, it may only be an extra 50 bucks or so, and the extra service will be well worth it in the long run.
Just my opinion any way.
Good luck with what ever you decide to do.
Paul
If you measure your draw length and go by that and then order a bow at say 28 1/2 inches, when you get the bow the actual draw length may be close to 29 inches or bit more. No matter what the cam or spec sheet says. Also keep in mind that the design of the grip and the accessories you use can effect your percieved draw length. It will not change the physical draw length ie; power stroke. It will however change the relationship of your anchor points on your face if you use any. Even changing releases can effect this, as well as using a string loop or not.
You should really get to draw and shoot the bow you want the way you are going to shoot it (your release and the such) before you buy it. A good shop should have the equipment and parts to set the bow up so it fits you correctly before you sign the check. Buying one over the internet or mail order might get you close, but unless you know a fair amount about bows, especially that model and brand you may have a hard time fine tuning it to fit you right. It also helps to have someone there to watch you draw to make sure everything lines up good.
Sometimes it could mean the difference between shooting well and enjoying the sport and having nothing but problems and getting frustrated and giving up.
My advice is if you have a decent shop near you go there and see if they will work with you. Let them know the budget you are on and what you are looking for. Chances are they will let you shoot a few different bows and you may decide to just wait and save the money to get a better one. I think you will be much happier in the long run, even if you get a cheaper bow. At least you will have some sort of support if you have any questions or problems.
And if you go there and get measured, buy it on line and then take it back to get it set up you may not get treated very well. You will also most likely have to pay a fair amount for them to do the work. If a shop is willing to work with you and explain things I don't feel you should take the money away from them and buy it somewhere else. At least reward them with the sale, it may only be an extra 50 bucks or so, and the extra service will be well worth it in the long run.
Just my opinion any way.
Good luck with what ever you decide to do.
Paul
#8
Joined: Oct 2004
Posts: 10
Likes: 0
From: Oklahoma
Paul, what you said makes perfect sense. I am buying my first bow and have been contemplating what you just described. I got measured at the local pro shop but am eyeing a bow package on the internet. I have been going over it in my head trying to decide if it is worth it. You have confirmed what I have been thinking. The service you will get at the local shop outweighs the $50 you might save. Not to mention the frustration of buying a cookie cutter package. Thanks for the advise.
Thread
Thread Starter
Forum
Replies
Last Post
Mathewsboy
Bowhunting
7
07-22-2004 09:02 AM
Trapper_Hunter
Bowhunting
21
07-22-2004 06:18 AM




