Go Back  HuntingNet.com Forums > Archery Forums > Technical
 GRRRRR....but..... >

GRRRRR....but.....

Community
Technical Find or ask for all the information on setting up, tuning, and shooting your bow. If it's the technical side of archery, you'll find it here.

GRRRRR....but.....

Thread Tools
 
Old 09-13-2004, 05:49 PM
  #1  
Nontypical Buck
Thread Starter
 
Pat Curtis's Avatar
 
Join Date: Aug 2004
Location: Decatur, IN
Posts: 1,425
Default GRRRRR....but.....

I just had 12 new Gold Tip XT Hunter arrows made up at a new archery shop in town. I had them put on white crestings, white fletchings, and a white nock. I wanted a right helical made out..and they made them all straight!!! [:@] I told them I wasn't going to pay for them..b/c I shoot Muzzy's..and there's no way that they'd shoot consistent to my field tips. After some talking, they said 1/2 price and 6 free mechanical broadheads.

So...ugh...I decided to take it..but I haven't decided which broadheads to get. Any advice on some GOOD mechanical blade broadheads? I get 6 for free..so I want some good ones...AND something that will go well with straight fletchings (this will be the first time in my life shooting straights too...GRRRRRR).

Any other advice for shooting/tuning straight fletched arrows?

Thanks.
Pat Curtis is offline  
Old 09-13-2004, 06:03 PM
  #2  
Senior Member
 
zak123's Avatar
 
Join Date: Aug 2003
Location: Ocean Springs, MS
Posts: 4,103
Default RE: GRRRRR....but.....

I would have just told them I wanted a helical on them. I do not like mechanical heads.
zak123 is offline  
Old 09-13-2004, 06:09 PM
  #3  
Nontypical Buck
Thread Starter
 
Pat Curtis's Avatar
 
Join Date: Aug 2004
Location: Decatur, IN
Posts: 1,425
Default RE: GRRRRR....but.....

I told them right helical..and they just plain messed up. It took 1 1/2 weeks to order the arrows and get them cut/fletched..and I'm not about to wait another week and a half! I have a few old arrows from last season..but...I've been thinking about switching to mechanical anyways...so this might be the right time.

Note to self, never go to that shop again....
Pat Curtis is offline  
Old 09-13-2004, 06:13 PM
  #4  
 
Join Date: Apr 2003
Location:
Posts: 373
Default RE: GRRRRR....but.....

if your bow is tuned good you still should get the muzzys real close to field point if not right with them i been shooting beman ics 340 carbon arrows and straight fletch with montec g5s and iam getting them right with feild point and very tight groups i have shot this out to 35 yards i dont shoot farther than this for hunting. good luck
oniedaeagle is offline  
Old 09-13-2004, 06:20 PM
  #5  
Nontypical Buck
Thread Starter
 
Pat Curtis's Avatar
 
Join Date: Aug 2004
Location: Decatur, IN
Posts: 1,425
Default RE: GRRRRR....but.....

Well, I'll take the 6 free broadheads though..and test them against my Muzzy's. I'm stout up to 40 yards...don't even plan on shooting anything over 35 though.

With a few minutes of research, I've found that NAP makes some good mechanical broadheads...
Pat Curtis is offline  
Old 09-13-2004, 06:27 PM
  #6  
Nontypical Buck
 
BGfisher's Avatar
 
Join Date: Feb 2003
Location: Middletown PA United States
Posts: 3,625
Default RE: GRRRRR....but.....

Try the G5 Montec Tekan. This thing even looks bad.
BGfisher is offline  
Old 09-13-2004, 08:30 PM
  #7  
Nontypical Buck
 
pdq 5oh's Avatar
 
Join Date: Feb 2003
Location: Oh USA
Posts: 1,584
Default RE: GRRRRR....but.....

If you're going to try mechs, look at the Snypers. They fly great, and leave big holes.
pdq 5oh is offline  
Old 09-13-2004, 09:40 PM
  #8  
Giant Nontypical
 
Kanga's Avatar
 
Join Date: Feb 2003
Location: Burleson TX USA
Posts: 6,455
Default RE: GRRRRR....but.....

Try the G5 Montec Tekan. This thing even looks bad
hate to say this but the Tekans are probably going to be illegal in most states cause the blades are what they classify barbed.

In other words they dont freely close.

There is a big thread on them over on archery talk.
Kanga is offline  
Old 09-13-2004, 09:45 PM
  #9  
 
Join Date: Aug 2003
Posts: 259
Default RE: GRRRRR....but.....

Try 'em. You might be surprised how well they fly out of a well tuned bow.
AKDoug is offline  
Old 09-13-2004, 11:07 PM
  #10  
Fork Horn
 
Join Date: Feb 2003
Location: Franklin WI USA
Posts: 336
Default RE: GRRRRR....but.....

im trying mechanicals this year for the first time, actually all of the stuff in my bow is my first experience with it, carbons, a modern bow, release, and mechanical broadhheads

i am trying out the steelhead 100, mar-den mini max 3 and the NAP Spitfire

they all shoot right with my field points, but I plan to decide which broadhead to put on depending on the stand -- the mini max has a 2" cutting diameter so I would use it when there is little possiblity of a longer shot, the steelhead is much smaller so I would shoot longer with it

i hope to try them all out and see how they perform
H80Hunter is offline  


Quick Reply: GRRRRR....but.....


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.