peep site for copper john
#1
Thread Starter
Join Date: Feb 2003
Location: monroe ohio USA
Posts: 293
peep site for copper john
anyone using these sites---was wondering i use the dead nuts pro series but need some help on a good peep to align to round pin guard. it seems to take a larger diameter apeture than the 3/16.just the standard peep no tubing. i have seen the new crosshair peep out with fiber optic which is suppose to be originally set up for these sites but i shoot multiple pins.
#3
RE: peep site for copper john
So what type of peep are you referring to the "Tru Peep" style or the "Shurz a Peep" style? The Tru Peep is similar to the rubber tubing style but without the rubber tubing and smaller overall. The Shurz a peep splits the string three ways and is not angled into the string like the other two but rather relies more so on the string angle at full draw.
#4
Thread Starter
Join Date: Feb 2003
Location: monroe ohio USA
Posts: 293
RE: peep site for copper john
dont care for the shurz peep because it seems to obstruct my vision in the peep with the 3rd string----looking more in line of the true peep style that are angled to the string.i have tried the largest hunters peep and it still seems to small.my string touches my nose at full draw also.
#5
Fork Horn
Join Date: Oct 2003
Location: Maine
Posts: 287
RE: peep site for copper john
I bought the cheapest peep I could find. I believe it is the tru peep. I comes in a little red package and is under $5. It works great with the dead nuts. I refuse to try any peep with a tube since a friend of mine got a shiner from his tube snapping. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
CharlieNY
Archery Gear
2
10-17-2006 01:16 PM