center shot
08-12-2004, 03:38 PM
#1
Thread Starter
Join Date: Apr 2003
Location:
Posts: 373
center shot
my friend has a buckmaster g2 and the cener shot on the paper work say 7/8 but if we move it there it has a real bad (x--0) tear when we move it to 3/4 inch from first burger hole its perfect the arrow we try were 2314 at 27 inch arrow and the second arrow was 2413 set at 28 inch both are perfect at 3/4 inch........ his set up is 29 inch draw at 70 pounds and 100 grain tip
08-12-2004, 05:45 PM
#2
Nontypical Buck
Join Date: Feb 2003
Location: Middletown PA United States
Posts: 3,625
RE: center shot
What's so hard to figure. This particular bow likes it different. It works so you go with what works. The factory just makes a recommendation of where to start your tuning, that's all.
08-13-2004, 07:05 AM
#4
Nontypical Buck
Join Date: Feb 2003
Posts: 2,358
RE: center shot
the "paper" center shot is measures as the offset from the center, it ignores things like your rest setting, any grip torque etc. Like ALL things in bow tuning, its a starting point.
Shoot what works on that particular bow.
--Bob
Shoot what works on that particular bow.
--Bob
