Cam & 1/2, Reflex bows
#1
Thread Starter
Join Date: Feb 2003
Location: Bremerton washington USA
Posts: 64
Cam & 1/2, Reflex bows
Was looking at the Reflex Griz, and was doing some research on the cam &1/2.
Is there any adjustments to this cam, like draw length? Been to Reflex and Hoyt sites and have found nothing about the cam&1/2, and draw length adjustments.....
Is there any adjustments to this cam, like draw length? Been to Reflex and Hoyt sites and have found nothing about the cam&1/2, and draw length adjustments.....
#2
RE: Cam & 1/2, Reflex bows
Yes there is plenty of adjustment but you realy need to get the cam that is your draw length.My 28" cam 1/2 on my Hoyt is adjustable from 27" to 29 1/2".In other words,if you are a 28" draw,order a 28" draw cam 1/2.
Putting your draw length in the middle will make for the most forgiving and the smoothest possible setup with the cam 1/2 possible.
Putting your draw length in the middle will make for the most forgiving and the smoothest possible setup with the cam 1/2 possible.
#3
RE: Cam & 1/2, Reflex bows
I agree with TFOX 100%. I am a 28" draw and have the same Cam 27-29 1/2. It makes for a more efficient system. From what I've heard, you also get better nock travel when you fall in the mid to upper ranges of the system.
#4
RE: Cam & 1/2, Reflex bows
I have not had a chance to play with any of the new Reflex bows since they went to the Cam and a Half but I did read on the Hoyt forums that the draw length adjustment range on the Reflex "version" was smaller than that on the Hoyt. Can anyone verify that?