Easton Axis Users Please Reply
02-03-2004, 07:12 AM
#1
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Liberty Indiana USA
Posts: 382
Easton Axis Users Please Reply
I am thinking of trying the new axis arrows and need some help. I have tried to find the chart for these shafts with no luck. I am going to be shooting a hoyt xtec at 67 pounds with the cam 1/2.I have a 29 inch draw, shoot a release and will use 100 grain fixed blade heads. I cut my arrows to 30 inches and use 3, 4 inch duravanes. What size do I need? Also, will I be able to get clearance using these vanes fletched at 4 degrees and still use a shoot through type rest? I have thought about trying a drop away, but like things simple. Thanks, Bhunter32.
02-03-2004, 07:16 AM
#2
Nontypical Buck
Join Date: Feb 2003
Location: CT, USA
Posts: 3,058
RE: Easton Axis Users Please Reply
BH32,
Clearance will likely be an issue.
340's should be fine, spine-wise. 400's will be too weak at that length and the C.5 likes a stiff arrow as is. 300s' should work fine too, but 340's would be my choice.
Clearance will likely be an issue.
340's should be fine, spine-wise. 400's will be too weak at that length and the C.5 likes a stiff arrow as is. 300s' should work fine too, but 340's would be my choice.
02-03-2004, 07:18 AM
#3
Join Date: Feb 2003
Location: SC USA
Posts: 1,434
RE: Easton Axis Users Please Reply
The charts are on the Easton website ! The all carbons are grouped together and the sizes are listed. If you scroll down below the chart the grouping is listed ....including the Axis.
I just ordered some 340's last week for my LX .....hopefully they'll get here soon !!
How do you like the Hoyt ?
Easton says 300's ???? Jeff is probably right though !!
I just ordered some 340's last week for my LX .....hopefully they'll get here soon !!
How do you like the Hoyt ?
Easton says 300's ???? Jeff is probably right though !!
02-03-2004, 09:15 AM
#4
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Liberty Indiana USA
Posts: 382
RE: Easton Axis Users Please Reply
Thanks for the replies guys. JeffB, how many gpi is the 340 shafts? I am waiting on the xtec, just ordered it recently. I have shot mathews for years, but just didn't really like what they are offering this year. Anyway, what better way to be involved in the mathews and hoyt battle than to have one of both.
If ya can't beat em' own both of them.[:-]. Any rest suggestions for the xtec? Keep the replies comin. Thanks, Bhunter32.
If ya can't beat em' own both of them.[:-]. Any rest suggestions for the xtec? Keep the replies comin. Thanks, Bhunter32.
02-03-2004, 11:04 AM
#7
Nontypical Buck
Join Date: Feb 2003
Location: CT, USA
Posts: 3,058
RE: Easton Axis Users Please Reply
There are ways around the drop-away rest issue, but you may not like them.
1) Switch to a vane that has a very narrow width base, like Flex-Fletch
2) Feathers have a more narrow base width as well
3) Go to a straight fletch w/ the new NAP quik-spin vanes
But my 1st recommendation is to invest in a quality drop-away rest.
1) Switch to a vane that has a very narrow width base, like Flex-Fletch
2) Feathers have a more narrow base width as well
3) Go to a straight fletch w/ the new NAP quik-spin vanes
But my 1st recommendation is to invest in a quality drop-away rest.
02-03-2004, 01:34 PM
#8
Join Date: Feb 2003
Location: KY USA
Posts: 779
RE: Easton Axis Users Please Reply
The 340's you can also go to www.eastonarchery.com & download a pdf file of their catalog & shaft charts.
02-03-2004, 03:45 PM
#10
Giant Nontypical
Join Date: Feb 2003
Location: HENDERSON KY USA
Posts: 6,634
RE: Easton Axis Users Please Reply
I agree with all.A drop away would be a wise move.
Don't get too cought up in the simple thing.Some drop aways are almost as simple as as standard rest.There is a string and a spring and stop.That's it,most standard rest have a spring and a stop,and the spring is counted on to hold the arrow up,the spring on a drop away just ensures the rest will fall.The most critical thing is the string being served in properly and some dropaways eliminate that by utilizing the cable slide to hold the string.
Don't get too cought up in the simple thing.Some drop aways are almost as simple as as standard rest.There is a string and a spring and stop.That's it,most standard rest have a spring and a stop,and the spring is counted on to hold the arrow up,the spring on a drop away just ensures the rest will fall.The most critical thing is the string being served in properly and some dropaways eliminate that by utilizing the cable slide to hold the string.