My current setup nap quicktune 3000, impact archery cosmic sight,
7 in. doinker and 2413 super slams.Thinking about a dropaway rest
carbon arrows and maybe a fixed pin sight.What are some of your setups
Thanks

2004 BowTech Liberty

29.5" draw at 71#

Trophy Taker Shakey Hunter arrow rest
Copper John DeadNuts Hunter 3-pin site
(Soon to order a custom 6" Stealth Stabilizer)
Jim Fletcher Tru Peep Hunter (1/8")
28.25" GoldTip 3-D Pro 75/95 arrow
125 grain Muzzy 3-blade b-heads
125 grain Rocky Mt Snyper b-heads
Tru-Fire X-Caliper release
(still not sure of my quiver)

30"/70#

Trophy Taker "Shakey Hunter" rest
Spot-Hogg "Real deal" sight
6" Stealth "Hunter" stabilizer
Tru-Peep "Super Hunter" peep.
String loop around 2 tie in nock sets.
Factory Installed Hush Kit/Vibrablocks
Arrows? Probably Easton Axis, or A/C/C 3-60's
NAP "Scorpion" 100gr heads
Rancho Safari "Cat Quiver I"
Scott "Rhino" release
SIMS Cable guard dampener thingy......just because it matched the camo perfectly and looked cool.[8D]

I am currently still shooting this bow for 3D right now until I get my Pro40 Freedom cam dialed in........YES I HAVE IT!!

For 3D I am using the following in place of the hunting versions above
Spot-Hogg "Hogg-it" sight
8" Stealth Hunter
and Carbon Express CXL350 selects......353grs.
Carter "Just Cuz" 3 finger thumb trigger release.

Hi Matt, how's the Rhino working out for you????[8D]

WWAG,
The Rhino is my now official "Go-to" release.......I shot it for years and then tried a few others but I'm back. To me it's just the perfect release for shooting off a string loop. You can also shoot a VERY small loop with the head design.
I tried a Carter One Shot this past season , and while EXCELLENT when shot with back tension, it doesn't respond very well to being punched because of the stiff crisp trigger.......that's important because you know how well we all use back tension when there's a nice buck standing in your only shooting lane.

29"/70#

NAP 3000 rest
Spot-Hogg "Hogg It" sight
8" NAP Shockblocker stabilizer...for now...transfered from previous bow but it feels a little heavy for the Liberty
Tru-Peep Hunter 1/8" peep.
String loop
Still undecided on arrows.
Rancho Safari "Cat Quiver I"
Scott lil' bitty goose release

70#, 29"

Shakey Hunter (may put a NAP 4000 on).
7 1/2" Vibracheck Carbon Isolator.
Copper John Pro II.
PSE 300 Comp Pros with 100 gr Magnus Stinger.
Scott Lil Goose.
Loop and Peep.

72 / 30.25

For 3D...and at the moment...

- Copper John Dead Nuts 5 pin Hunter

- Either a GKF Tranquilizer/Sim Enhancers combo or a Xring 7 inch Silicone/Sim Enhancer combo on the front side....with either a regular Sims Enhancer or a PSE NV unit mounted to a stabilizer coupler on the back side.
(I have not found the perfect balance for me yet)

- Trophy Taker Shakey Hunter at the moment but may go back to a GKF Infiniti

- Shurz a Peep peep sight...medium

- Bowtech Hush Kit (w/vibrablocks in the correct position this time...)

- Beman ICS 340s at the moment but may go with Easton Axis

- Tru Fire Sure Fire release

- loose velcro wrist sling

...if I use it for hunting then I will probably use a setup similar to what I have on the MM VFT right now....

- Copper John Deadnuts 3 pin w/Afterburner light

- GKF Golden Premier rest

...and one of the stabilizer-arrow combinations mentioned above....

...but I am probably just gonna go with the MM VFT in that regard.

Here's my setup:

29" draw, 71lbs.
Copper John Dead Nuts Pro Sight .019 pins with Afterburner light
Trophy Ridge Drop Zone Rest
X-Ring stabilizer (Soon to be Stealth 6" hunter)
1 nock with string loop
Fletcher Tru peep- Hunter peep sight
Beman ICS 400 arrows ( Soon to be Eastin ST Axis 400's)
NAP Spitfire 100gr. Mechanical Broadheads
T.R.U. Loopmaster Release