Patriot tech ?
01-04-2004 | 10:58 PM
#1
Thread Starter
Typical Buck
Joined: Dec 2003
Posts: 953
Likes: 0
From: Greenfield, IN
Patriot tech ?
I have an '02 Patriot... I have a question on how to make my bow meet the factory specs?
The factory specs are 33.75" a-a and 7.25" brace height and 5/16" from the mod screw to the limb.
My bow is 34.25" a-a 7 3/16" brace height... and is the 5/16" measurment supposed to be from the center of the screw or the edge? Mine is 5/16" to the edge and about 6/16' to the center...
What do I need to do to get everything back to factory specs?
The factory specs are 33.75" a-a and 7.25" brace height and 5/16" from the mod screw to the limb.
My bow is 34.25" a-a 7 3/16" brace height... and is the 5/16" measurment supposed to be from the center of the screw or the edge? Mine is 5/16" to the edge and about 6/16' to the center...
What do I need to do to get everything back to factory specs?
01-05-2004 | 07:37 AM
#2
Nontypical Buck
Joined: Feb 2003
Posts: 1,584
Likes: 0
From: Oh USA
RE: Patriot tech ?
It sounds like the string has stretched. Twisting it will shorten ATA and increase brace height. I'm pretty sure the measurement is from the edge of the screw head to the limb, BowTech_Shooter knows for sure. You may have to twist the cable as well to get everything just right but, start with the string. When done, scale the bow to check draw weight.
