Measuring Arrow Length + suggestions for carbons
02-02-2002 | 06:19 AM
#1
Thread Starter
Joined: Feb 2003
Posts: 8
Likes: 0
From: Baraboo Wisconsin USA
Measuring Arrow Length + suggestions for carbons
Where do you measure for Arrow Length? Is it from the end of the nock to the end of the arrow shaft? I shoot a Mathews Q-2 (purchased a month ago) with a 30" draw. I use a C Winn Release and shoot directly off the String. What length arrow would you suggest? I shoot at 58 lbs. and I'm interested in purchasing some new Carbons Arrows for hunting and Spot league. What would you recommend?
02-02-2002 | 06:51 AM
#2
Joined: Feb 2003
Posts: 79
Likes: 0
From: Manitowoc WI USA
RE: Measuring Arrow Length + suggestions for carbons
Dalton-
Arrow length is measured from the nock groove to the end of the shaft w/o the tip.
If that bow is indead a 30 " AMO draw I reccon the shortest arrow that you could get away with would be around 28.25".
If you want to test a few arrows for you bow you can freely download my program and run a few combinations.
Happy Shooting!
>>>------Tony Virnoche------>>>
>>>---The Archery Program--->>>
Sorry links to commercial sites are not allowed. Welcome to the forums though!
Edited by - tribalscream on 02/02/2002 08:00:45
Arrow length is measured from the nock groove to the end of the shaft w/o the tip.
If that bow is indead a 30 " AMO draw I reccon the shortest arrow that you could get away with would be around 28.25".
If you want to test a few arrows for you bow you can freely download my program and run a few combinations.
Happy Shooting!
>>>------Tony Virnoche------>>>
>>>---The Archery Program--->>>
Sorry links to commercial sites are not allowed. Welcome to the forums though!
Edited by - tribalscream on 02/02/2002 08:00:45
