simms products
02-01-2002, 10:06 AM
#1
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Liberty Indiana USA
Posts: 382
simms products
I am thinking about adding the enhancer stabilizer to my q2xl, and was wondering what your opinions are on it. I am also thinking about trying the simms cable slide, and was wondering what you think of it, and does it work better on the q2xl, than the factory slide. Thanks for your responses.
02-01-2002, 02:38 PM
#2
Join Date: Feb 2003
Location: Aloha Or USA
Posts: 9
RE: simms products
I don't know how the cable slide will perform on your Q2xl, but I installed a teflon slide on my Hoyt Ultratec and picked up 4 fps just by reducing drag on the cable guard. Bohning makes one as well and it's a little cheaper, works great.
Steve
Steve
02-01-2002, 08:54 PM
#5
Typical Buck
Join Date: Feb 2003
Location: Whitetail Ridge Iowa
Posts: 949
RE: simms products
BH, I went to a bow shop(Performance Archery) down in San Diego last week and the owner showed me the new stabilizer Simms had come out with for 2002. I put it on a Q2 and shot a few arrows,it felt great.If I'm not mistaken it's called the Modular Stabilizer consisting of 3 balls/circles/donuts that screw together-additional sections called 'singles' can be added as well...as can the Enhancer. He only had the model he had brought back from the show so I'm having one sent to me back home when they get their order in. It was around $60.
TB
Edited by - Two Beards on 02/01/2002 21:57:54
TB
Edited by - Two Beards on 02/01/2002 21:57:54
02-02-2002, 01:39 AM
#6
Fork Horn
Join Date: Feb 2003
Location: fairbanks alaska
Posts: 144
RE: simms products
i dont rave about many products unless i realy believe in them one is simms, i believe they do what they say they do. limb savers realy made a difference on my bowtech cut the vibrations way down.
02-02-2002, 12:32 PM
#7
Nontypical Buck
Join Date: Feb 2003
Location: Fulton county IL USA
Posts: 4,271
RE: simms products
I can't believe you guys with the Mathews haven't been forced to buy the Simms slide earlier.My stock slide on my Q2 would make a mean squeak once in awhile so I was forced to by the Simms slide and wow what an improvement.The slide seems to be made to fit Mathews,with the same staggered slots as our stock slides.Give one a try,they are nice. As far as the stabilizer goes,I have an Enhancer 2000 with a little stabilizer enhancer screwed into the front of the 2K and another little stabilizer enhancer screwed into the back bushing behind the stabilizer and below the grip.... talk about taming bow jump....WOW!!! This is one sweet shooting Q2
