Muzzy ZE of SC Patriot
#1
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Steuben County, NY
Posts: 277
Muzzy ZE of SC Patriot
Could someone tell me how they have there Muzzy ZE set up on their SC Patriot. I can' t seem to get fletching clearance with my setup. It is a 2003 if that makes a difference. Thanks. And Pictures would be great.
#2
Join Date: Mar 2003
Location: Kansas City, MO
Posts: 71
RE: Muzzy ZE of SC Patriot
MJR10, I have the exact same setup and am not having any clearence problems. I' m at work now, but will try to get some pics on tonight. The first thing I think of is your nock set and the center shot. Have you paper tuned the bow yet? If the nock is low/way low, it will push the nock end of the arrow down into the rest, causing contact. If that' s the case, you will need to move it up and your anchor point will most likely change too. My setup is a lefty, so the pics will appear backwards to you, assumming you' re shooting righthanded.
#3
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Steuben County, NY
Posts: 277
RE: Muzzy ZE of SC Patriot
Thanks Phil. If you can let me know were the bottom of the rest is relative the shelf and how far you have the set screw backed out that would be great. I am shooting right handed. No I have not paper tuned yet. I will get to that sometime this week I hope. The nock point was what I was going to try next. Thanks for the help.
#4
Join Date: Jul 2003
Location: baltimore,md
Posts: 547
RE: Muzzy ZE of SC Patriot
Does the MZE attach to the cable slide,or to the cable itself, like on a LX?The reason I ask is because on the 03 SC Patriot I had,it did' nt have enough cable slide travel to operate the MZE properly.