Muzzy ZE of SC Patriot
 

Could someone tell me how they have there Muzzy ZE set up on their SC Patriot. I can' t seem to get fletching clearance with my setup. It is a 2003 if that makes a difference. Thanks. And Pictures would be great.

RE: Muzzy ZE of SC Patriot
 

MJR10, I have the exact same setup and am not having any clearence problems. I' m at work now, but will try to get some pics on tonight. The first thing I think of is your nock set and the center shot. Have you paper tuned the bow yet? If the nock is low/way low, it will push the nock end of the arrow down into the rest, causing contact. If that' s the case, you will need to move it up and your anchor point will most likely change too. My setup is a lefty, so the pics will appear backwards to you, assumming you' re shooting righthanded. :)

RE: Muzzy ZE of SC Patriot
 

Thanks Phil. If you can let me know were the bottom of the rest is relative the shelf and how far you have the set screw backed out that would be great. I am shooting right handed. No I have not paper tuned yet. I will get to that sometime this week I hope. The nock point was what I was going to try next. Thanks for the help.

RE: Muzzy ZE of SC Patriot
 

Does the MZE attach to the cable slide,or to the cable itself, like on a LX?The reason I ask is because on the 03 SC Patriot I had,it did' nt have enough cable slide travel to operate the MZE properly.

RE: Muzzy ZE of SC Patriot
 

It attaches to the cable slide. I have all kinds of room left on the cable guard. I thought it was very easy to setup, I did need to watch the video though.

RE: Muzzy ZE of SC Patriot
 

When I put the MZE on my 02 Pat I had to let the cables cross above the cable guard.
That will give you the little extra distance needed.

RE: Muzzy ZE of SC Patriot
 

Do what Ausie said , end of problem .